Specification :

DISC Separator Centrifuge
Disc separator, also known as disc separator is a high efficiency, large output, advanced automation equipment. Is suitable for low solid content slurry, a smaller proportion of poor separation of immiscible liquids, pharmaceutical, food, chemical, biological products, beverage products and other necessary equipment industries. The principle is based on the proportion of materials of different centrifugal force discontinuity with to achieve the separation. New advanced automatic control is disc separator characteristics superior to other separation equipment.
Disc separator according to the separation mode, the disc separator can be divided into three-phase separator ( liquid - liquid - solid) disc separator ( DRY) and two-phase separation ( liquid - solid) disc separator ( DHC) two, while the disc type automatic slag separator in different ways based on, can be divided into manual and automatic slagging disc separator system is fully controlled by PLC automatic slagging disc separator, according to the disc separation inside the slag film in different ways, disc separator can be divided into piston slag disc separator with nozzle slag separator, and can be selected according to the characteristics of slag material way.

Working principle

Thermal coupling through the drum motor drive to do high-speed rotation around the main axis, the liquid feed pipe from the top center of flow to the bottom of the drum, the disc surface diversion hole trend to drum wall, the centrifugal force field, compared with liquid weight of solid phase formation of sediment sink to the drum wall, light liquid pumps to the heart by the light liquid exit discharge. Heavy liquid within the cone along the disc tend to drum wall, then up to the heavy liquid flows through the heart pump discharges them from the heavy liquid, thus completing the heavy liquid and light liquid separation.
Double-cone drum cavity, compression can play the role of sediment, sediment concentration increased. Drum peripheral with sediment slurry spray nozzles. Nozzle diameter based on the number and nature of the suspension, and the capacity to determine the degree of enrichment. To improve the concentration of slag, the separator there is some sediment will be discharged back to recycling within the structure of the drum. Sediment solid concentration than the feed solid concentration increased by 5 to 20 times. This separation machine capacity up to 30t / h, suitable for handling solid particles 0.1 to 100 microns in diameter, solid concentration is usually less than 10% ( up to 25% ) of the suspension.

Parameters
Biopharmaceutical Disc Separator

nozzle concentration separator

diary separator

Oilseparator
starch centrifuge

Discstarchseparatorcentrifuge

Discbeerseparatorcentrifuge

Disc yeastseparatorcentrifuge

Pharmaceuticalbiologicalcentrifuge

Plantextractsc entrifuge

Foodbeveragecentrifuge

Biologydieselcentrifuge

DRY

Discdiaryse paratorcentrifuge

Vegetableoilcentrifuge

Mineraloilcentrifuge

Chemicalcen trifuge

Animaloilcentrifuge