• 10/ 100/ 1000Mbps auto-sensing port 32 bit and 64 bit PCI slot

• Maximum Jumbo Frame Size up to 1000Mbps

• 2 built-in independent FIFO to protect against possible data loss

• PCI 2.2 Plag-n-Play supportÿ

Half and Full Duplex

Half and Full Duplex Operations at 100/ 200 Mbps data speeds used in conjunction with 802.3x flow control.

Standards

• IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T

• I/ O Address: Self-setting IRQ and I/ O port address

• Interrupt ( IRQ) : INTA on PCI slot pin assignment

• Boot ROM Size: 32K, 64K EPROM ( Option)

Bus Interface

• 32-bit 33MHz / 64-bit 66MHz PCI bus unit

• PCI2.1 and PCI 2.2 standards

Half/ Full Duplex

• 10/ 100/ 1000Mbps Auto-Negotiation RJ-45 port

• 10/ 100Mbps Half/ Full Duplex mode, 1000Mbps Full Duplex Mode

• Auto-Negotiation technology, Auto-detection Half/ Full Duplex mode

• IEEE802.3x Full Duplex flow control, Auto-Matching MDI/ MDIX, CSMA/ CD Protocol

• Sending and receiving of Jumbo Frame at 1000Mbps

Bus Access Method

• 2 Built-in separate FIFO buffers

• Bus Master

Hardware Interface and Environment

• LED Indicators: 10M ACT, 100M ACT, 1000M ACT

• Operating Temperature: 10° C ~ 55° C

• Humidity: 10% ~ 90% ( non-condensing)