Specification :

70W laser power supply generator
CO2 laser power supply Good compatibility, lengthen the life of laser .Easy control of laser power
CO2 laser power supply Good compatibility: It is a new generation of medical laser power specially developed for a variety of CO2 laser therapy instruments.2. Dramatically lengthen the service life of laser.3. Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.4. Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.5. The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.6. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.7. The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.8. Application: It is widely used in various kinds of laser therapy instruments, laser rejuvenation machine, laser eyebrow washing machine, laser beauty machine, etc.

Input Input Voltage AC220V or AC110Vto be specified when placing order
AC frequency 47440HZ
Cold Surge Current 60A( AC220V Input) d30A( AC110 Input)
Current Leakage 0.7MAAC220V Input d0.4MA( AC110V Input)
Output Maximum Input Voltage DC 40KV
Maximum Output Current DC 28MA
Efficiency e90full load
Mean Time Between Failure ( MTBF) e1000H
Response Time d1Msfrom the switch Signal is given to the output current up to 90% of the setting current
Control Interface TTL level switch control; high or low effective level can be chosen ( details refer to the control terminal specification)
Pressure-proof Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection can work in open-circuit condition for a short timeRequire a good protective earthing and avoid arc between the positive and the machine shell
Environmental Operating Temperature-10~ 40, Relative Humidity ( RH) d90
Cooling Way Force-Air Cooling ( FAC)
Dimension L× W× H= 280* 173* 97( mm)