Specification :

BVIR battery internal resistance tester
NEWARE BVIR battery internal resistance tester is the high precision internal resistance tester designed for rechargeable batteries ( including lead-acid, nickel cadmium, nickel metal hydride, lithium ion, lithium polymer batteries) . It can also test the battery voltage.It’ s operate simple, reliable, and the rate of performance/ cost is high. It’ s been widely used in scientific research institutions, producter, distributor of rechargeable batteries.

BVIR system features:
Adopt measure methods according to GB / T 11013-1996 and IEC 61436: 1998 standard, the result of measurement is more accurate and reliable;
Measure the battery’ s Alternate Current internal resistance directly and quickly;
Characteristic by simple circuit, high integration, powerful anti-interference ability, measured with a constant AC less than 20mA, stable and reliable performance;
High-end digital display tube, the data show stable, easy to read;
Customized test cable, reduce errors;
Voltage, resistance show with 3 .5-digit table display, automaticly switching resistance, voltage range, no need to change range, easy to operate;
The internal resistance and voltage of cell or battery can be tested at the same time , measurements also show a wide range , can be used for various types of batteries and battery packs that the voltage is less than 20V;
Beautiful appearance, solid structure, small size, easy to carry.

BVIR Technical Specification
Item Description
Measuring Method AC 4 terminals
Voltage Voltage Measurement 0~ 20V
Precision 0.1%
Resistance Resistance Measurement 20m© 200m© 2000m©
Auto/ Manual Switch
Precision 0~ 200m© 1%
201m© ~ 2000m© 3%
A/ D 12 Digits SAR Comparing
Testing Sampling Frequency 1KHz
Sampling Rate 1000 times/ S
Current < AC 20mA
Response Refresh 5 times/ S
Comparator On/ Off ( Manual)
Number of Comparator 10Sets
Data Storage 100, 000 Entries
Calibration A 100 mOhm Resistor in Standard Package for Calibration
Dimension W* D* H: 120* 75* 25( mm)
Weight 200g