Specification :

DST PC

Introduction
Thank you for choosing DST-PC, Diagnostic System Tester by DENSO.
DST-PC is Diagnostic System Tester for common rail system by DENSO.
Please read this manual well before using it for proper and safe use.
Functions
DST-PC is trouble diagnosis tool for common rail system by DENSO, and has following functions.
[ Project]
Manage project

[ DTC]
Read/ Delete DTC

[ Data Monitor]
Monitor the value or information in ECU from Sensors, Actuators, Integrators and Adaptations

[ Active Test]
Compulsory drive of actuator such as injector

[ Utility]
Utility functions such as Injector compensation, Injection Quantity Correction, etc.

Install
It is needed to install communication interface driver and DST-PC ( application) on your PC to use this software.
DST-PC can be used only when communication interface driver is installed properly.
IMPORTANT
• Be sure to install as Administrator. Wrong action can be caused if you install as other user.
• When installing communication interface driver, follow the instructions by installer and don’ t connect communication interface with computer unless you are instructed. Computer might not be able to recognize communication interface if it is connected improperly.
NOTE
To use the DST-PC, be sure to log-in to Windows with administrator user account.