Specification :

CAN Communication DiagnosisDST-2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional.

Easy operation on LCD display with touch panel5.7inch full color display with touch panel assists an easier operation.
Voltmeter and Oscilloscope Not only communication basis disgnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part.
Data recording to your PCSaved data such as data-list can be downloaded to your PC.

IT-2 Main Unit
Items Specification Dimensions 145mm (W) x 223mm (H) x 71mm (D) Weight Approx. 1380g Source voltage DC10-32V Power consumption Normal:7W (12VDC), Charging: 10W (12VDC) Operation temperature 0~45C Storage temperature -10~60C LCD display 5.7-inch color STN (320x240), transparent type of 256 colors Adjustable brigthness/contrast Touch panel Input: by finger or stylus pen Key Four (up, down, two function keys) Built-in clock For a time stamp PC Communication PC card slot CFx1ch (CF standard type I, II) USB Host: 1ch, Function: 1ch Serial 1ch (RS-232C) Vehicle communication CAN, ISO9141 Back up power supply Lithium-ion battery 7.4v 1000mAH Recharge hour (at normal temperature) Approximate operating time Approx 5 hours (fully discharge to full charge) 80 minutes (normal operation) Voltage Measurement Function

Items Specification Maximum sampling rate 250s/sec Input channel 1ch Voltage range (vertical scale) 1V/div, 2V/div, 5V/div Time range (horizontal scale) 100ms/div, 200ms/div, 10s/div Oscilloscope Function

Items Specification Maximum sampling rate 500ks/sec Input channel 2ch Trigger functions Mode Auto, normal, single Trigger 10%, 50%, and 90% of the monitor Voltage range (vertical scale) 100mV/div, 200mV/div, 500mV/div~10V/div Time range (horizontal scale) 5us/div, 100us/div, 200us/div,~10s/div (200ms and higher is the Roll mode)