Specification :

Purpose

The instruments is designed and made as per the National Standard GB/T267 ¡°Test Methods for Flash Point and Fire Point of Petroleum Products (Open Cup Methods)¡± and Industry Standard of Petrochemical SH/T0318 ¡°Technical Requirements for Open Cup Flash Point Tester¡±. It is used to determine the flash point and fire point of lubricating oil and Dark petroleum products.

Technical parameters
1. Power supply: AC 220 V¡À10%£¬50Hz;
2. Outer crucible:
(1) Material: Carbon structural steel;
(2) Diameter of upper opening: ¦µ100¡À5 mm;
(3) Height: 50¡À5 mm;
(4) Diameter of bottom: ¦µ56¡À2 mm;
3. Inner crucible:
(1) Material: Carbon structural steel;
(2) Diameter of upper opening: ¦µ64¡À1 mm;
(3) Height: 47¡À1 mm;
(4) Diameter of bottom: ¦µ38¡À1 mm;
(5) Scale line: there is a line 12 mm away from the rim of upper opening and a line 18 mm away from the rim of upper opening.
4. Gas tube: the diameter of nozzle is¦µ0.8¡«¦µ1 mm. The inner surface of tube is smooth and it can adjust flame to 3 to 4 mm.
5. Heater: Heated by an electric furnace. Heating power is 1000 W and adjustable.
6. Thermometer: 0¡«360 ¡æ; each scale division is 1 ¡æ. It conforms to GB/T514.
7. Ambient temperature: ¡Ü35 ¡æ;
8. Relative humidity: ¡Ü85£¥;
9. Total power consumption: not more than 1100 W