Specification :

Features : Specifications :

* JBL 12 in low frequency driver with a 64 mm ( 2.5 in)
diameter edgewound ribbon voice coil which provides
more cross-sectional wire area in the voice coil gap than
round wire designs, for greater efficiency and power handling.

* Ferro-fluid cooled compression driver with titanium
diaphragm improves high frequency performance as
well as system reliability.

* The advanced network topology crossover design shapes
frequency response and delivers " coherent summation"
in the crossover region.

* High-voltage capacitors and inductors with massive cores
and heavy gauge wire enable the crossover network to
handle high power without saturating.

* Progressive Transitionâ„¢ high frequency waveguide provides
superior coverage control, reduced distortion, and smoother
frequency response.

* The rugged, acoustically superior enclosure is constructed
from 19 mm ( .75 in) MDF ( Medium Density Fiberboard) using
advanced adhesives and mechanical fastener technology for
extreme durability and improved low-frequency performance.

* SonicGuardâ„¢ protects the highfrequency driver from excess
power without interrupting the performance.

* Non-resonant, all-steel handles are used.

* Attractive 18-gauge hexagon perforated, steel grille protects
components from damage.

* Dual-angle pole-mount socket allows the speaker to tilt
10° for more uniform audience coverage.

Power Rating : 250 W / 1000 W

Frequency Range : 60 Hz - 16 kHz
( -10 dB)

Dimensions
( H x W x D) : 572 mm x 394 mm x 318 mm
( 22.5 in x 15.5 in x 12.5 in)

Frequency Response : 70 Hz - 12 kHz
( ± 3 dB)

Nominal Impedance : 8 ohms

Sensitivity : 99 dB SPL
( 1w/ 1m)

Recommended Amplifier Power : 250 W to 500 W into 8 ohms

Maximum SPL : 129 dB

Nominal Dispersion : 90º x 50º

Crossover Frequency : 1.8 kHz

Weight : 19.5 kg ( 43 lb)

High Frequency Driver : JBL 2412 1 in exit compression driver
mounted on Progressive
Transitionâ„¢ Waveguide

Low Frequency Driver : JBL M112-8

Input Connectors : Neutrik® Speakon® NL-4 ( x1) ; .25 in
TS phone jack ( x1) ; parallel