Specification :

Applicatioins
It can be widely used in various levels of hospital to make general radiography or ray-filter radiography of abdomen, limbs, skeleton, head, chest and other parts in supine position, lateral position

--Parameters of main unit
--Voltage: 380V, 50Hz
--HV frequency at conversion: 50KHz
--Max. output of power: 20kW
--Max. tube voltage: 125kV
--Max. tube current: 200mA( current range: 80-200mA)
--Max. mAs: 320mA
--X-ray tube: small focus 1.0mm; big focus 2.0mm

Parameter of X-ray Table
--The height of table top to ground: 690mm;
--Horizontal movement distance of table top: 220mm
--Vertical movement distance of table top: 900mm;
--Vertical movement distance of filter: 540mm;
--Suitable for the loading of various X-ray Cassettes;
--Focus-film distance of X-ray tube assembly: 60-1210mm
--The rotation range of X-ray tube assembly around the center of pillar: 3 steps;
--The rotation range of X-ray tube assembly around the center of horizontal arm: ± 90;
--The vertical movement along pillar of X-ray tube assembly: 980mm
--The hotizontal movement along ground rail of X-ray tube assembly: 1320mm
--Beam limiter is equipped with point light and 30s delay mechanism;
--Ray-filter grid: grid ratio is 10: 1, grid density > 40 lines/ cm