Products Catalog (13) - Wenzhou Jiede Pipeline Industry Co., ...

high neck flange

WN also known as high-neck flange welded neck flange with a suitable pressure, temperature high and large diameter pipe occasions. Sealing surface type are flat, sudden face, ....
return

Molding process: Stainless steel, nickel and copper using cold, mandrel shape ( which can minimize the elbow wall thinning problems) ; carbon steel and other thermal processing, ....
bend elbow

Wall thickness: SCH5S-SCH160
Size: seamless DN15-DN600 ( 1 / 2 " -24" ) are sewing DN15-DN1200 ( 1 / 2 " -20" )
Material: 304, 304 L, 316, 316 L, 321, 20 #
Standard: GB / T....
socket welding....

Socket welding flange used in the PN d 10.0MPa, DN d 80 of the pipeline. Owned system: Europe, the Americas Executive Standard: HG20597-97 HG20619-97 GB/ T9117-2000
slip on flange

Flange neck and neck with a high degree of low stiffness of the flange, load capacity improved. Compared with the welded flange, weld heavy workload, electrode consumption high, ....
blind fange

Blind Flange also known as solid flange, used to close the pipe ends used. Usually used in water supply branch pipe end. There is a temporary part of the pipe sections to first....
stub end

Wall thickness: SCH5S-SCH160
Size: seamless DN15-DN600 ( 1 / 2 " -24" ) are sewing DN15-DN1200 ( 1 / 2 " -20" )
Material: 304, 304 L, 316, 316 L, 321, 20 #
Standard: GB / T....
cap

Products: Pipe Cap
Material: stainless steel ( 304 304L 316 316L 321)
Path: DN15-DN1200
Wall thickness: SCH5-SCH160
Standard: ASME DIN JIS BS GB / T JB SH HG
Uses: water, ....
eccentric reducer

Wall thickness: SCH5S-SCH160
Size: seamless DN15-DN600 ( 1 / 2 " -24" ) are sewing DN15-DN1200 ( 1 / 2 " -20" )
Material: 304, 304 L, 316, 316 L, 321, 20 #
Standard: GB / T....
concentric reduer

Wall thickness: SCH5S-SCH160
Size: seamless DN15-DN600 ( 1 / 2 " -24" ) are sewing DN15-DN1200 ( 1 / 2 " -20" )
Material: 304, 304 L, 316, 316 L, 321, 20 #
Standard: GB / T....
reducing tee

Manufacturing Standard:
By GB/ T12459, GB/ T13401, HG/ T21635, HG/ T21631, SY5010, SH3408, SH3409, ASME / ANSI, B16.9 JIS B2311/ 2312/ 2313, DIN2605/ 2615/ 2616/ 2617 standards....
equal tee

Manufacturing Standard:
By GB/ T12459, GB/ T13401, HG/ T21635, HG/ T21631, SY5010, SH3408, SH3409, ASME / ANSI, B16.9 JIS B2311/ 2312/ 2313, DIN2605/ 2615/ 2616/ 2617 standards....
elbow

Molding process: Stainless steel, nickel and copper using cold, mandrel shape ( which can minimize the elbow wall thinning problems) ; carbon steel and other thermal processing, ....

Select

and clickoror

Clear All - Select All