Specification :

Product Description
CAN Bus Isolated Introduction
The Series CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. This product can insulate CAN bus for a distance up to 10Km. This product enables equipment connections to the bus to be doubled. All upper levels protocol is supported.
The Series CAN Bus Isolated Repeater can be widely used, such as Industrial Controls, Intelligent Transportation Systems ( ITS) , Industrial Networking, Supervisory Control and Data ( SCADA) and so on.

ELECTRICAL
Isolation 3000Vsm
Lightning/ Surge Protection 1~ 2 lightning strikes
ESD Protection 15KV

CAN BUS
Connector Type Terminal
Data Rate DC -1.2Mbps
Extended Distance 10Km

GENERAL
Operating Temperature -40 ~ 70C / -40 ~ + 158F
Operating Humidity 0 ~ 95% non-condensing
Mean Time Between Failure ( MTBF) > 70, 000hrs
Power Supply Input Voltage 9~ 18V DC
Power Supply Output Voltage 5V DC
Dimensions ( H × L× W) 80mm× 60mm× 23mm/ 3.15� × 2.36� × 0.91�