Products Catalog

Specification

The VEEMUX® Audio/Video Matrix Switch routes audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/5e/6 UTP cable. It is capable of connecting to as many as 32 video sources via transmitters and 16 video displays via receivers with a maximum extension of 600 feet between the local and remote units.

A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connect to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.

* Configure and control the switch through Ethernet, serial port or front panel buttons.
* Matrix Control Software with Graphical User Interface is included.
* Supports resolutions up to 1920x1440.
* Inputs and outputs can be named.

* Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
* Equipped with Liquid Crystal Display (LCD) for front panel operation.
* A digital VU-meter shows the audio levels of the selected output.
* Each output provides one video signal and one stere oaudio signal
* Each input can be independently connected to any or all outputs with no image degradation.
* No loss of audio or video quality between the local and remote units.
* 1RU or 2RU rackmount case is standard.
* VGA, S-Video and HDTV transmitters and receivers can be supported on the same VEEMUX unit.
o VGA inputs only work with VGA outputs, S-Video inputs only work with S-Video outputs, and HDTV component video inputs only work with HDTV component video outputs

VEEMUX SM-8X8-C5AV-LCD

* Female RJ45 input/output connectors.
* Analog bandwidth is 175 MHz.
* 10/100BaseT ethernet interface.
* Supported protocols: HTTP. HTTPS, Telnet
* RS232 interface

Power
* 110 or 220 VAC at 50 or 60 Hz via IEC connector.
* Power consumption: 20W
* Add -48V5V10A2, optional internal DC-DC converter, to install the
SM-8X8-C5AV-LCD in a Telecom environment.

MTBF
* 58,607 hrs

Cables
* CAT5, CAT5e or CAT6 UTP straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).

Environmental
* Operating temperature: 32°F to 100°F (0°C to 38°C).
* Storage temperature: -20°F to 140°F (-30°C to 60°C).
* Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approvals
* CE, FCC, RoHS

Local Unit (Transmitter) Video

* VGA transmitter:
o Male 15-pin HD connector for input connection.
o Female 15-pin HD connector for local monitor.
o Compatible with SVGA, XGA, and VGA.
* S-Video transmitter:
o Male 4-pin miniDIN connector for input connection.
o Female 4-pin miniDIN connector for local monitor.
o Compatible with S-Video.
* HDTV transmitter:
o Three RCA plugs for input connection.
o Three RCA jacks for local monitor.
o Compatible with YPbPr component video.
* Input impedance: 75 Ohms.
* Maximum input level: 1.45Vp-p.
* Supports Separate and Composite TTL level sync.
* Input Sync frequency ranges:
o Horizontal: 15 kHz to 130 kHz.
o Vertical: 30 kHz to 150 Hz.
* Video is DC coupled.

Audio
* VGA video + audio receiver: 3.5mm stereo audio RCA plugs for input connection and 3.5mm stereo audio jack for local speakers.
* S-Video + audio receiver: two RCA plugs for input connection and 3.5mm stereo audio jack for local speakers.
* HDTV + stereo audio receiver: two RCA plugs for input connection and two RCA jacks for local speakers.
* Input impedance: 10k Ohms.
* Maximum input levels: 3.1Vp-p (line level).
* CD quality audio output.

Power
* 110 or 220 VAC at 50 or 60 Hz via AC adapter.
* Power consumption: 10W
* Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the local unit in a Telecom environment.

Remote Unit (Receiver)
Video

* VGA receiver:
o Female 15-pin HD connector.
o Supports resolutions up to 1920x1440.
* S-Video receiver:
o Female 4-pin miniDIN connector.
o Supports maximum 800x600 S-Video resolution.
* HDTV receiver:
o Three RCA jacks.
o Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p.
* Video quality adjustment for different lengths of CAT5/5e/6 cable is done manually for video-only units and automatically for audio/video units.
o When using CAT6, some degradation may be experienced depending on the length of the cable.
* Output impedance: 75 Ohms.
* Maximum output level: 1.45Vp-p.

Audio
* VGA video + audio receiver: 3.5mm stereo audio jack.
* S-Video + audio receiver: 3.5mm stereo audio jack.
* HDTV + stereo audio receiver: two RCA jacks.
* Frequency response: 20 Hz to 20 kHz, ±1dB.
* Signal-to-Noise Ratio (SNR): 72 dBA.
* Total Harmonic Distortion and Noise (THD+N):