Snap Idle

Snap Idler is a component to keep chain tensioned. It' s engineering plastic made " carrier " hold link plates to prevent chain loosened. As shown in below, there are....

Chain Coupling

Chain coupling is the mechanism component for direct connection of two axles to transmit revolving power.

Characteristics
1. Absorb clearance at connecting....

Single-Double Sprocket

Single-Double ( SD) Sprocket works with two single chains to drive roller conveyers. Typical material is structural carbon steel with induction hardening....

Standard Sprocket

Standard sprocket is designed and made through long experiences to bring the highest efficiency in working with power transmission chain.

Side Bow Chain

Hitachi Side Bow Chain consist of larger clearance between Pin and Bushing, as well as well adjusted clearance between outer and inner links. This special chain....

O Ring Chain

Hitachi O Ring Chain is with O Ring to maintain lubricant oil. It is recommended for the condition oiling is difficult or impossible, oil may cause some residual....

Heavy Duty Roller Chain

Hitachi Heavy Duty Roller

Chain is recommended for machine and equipment working under extremely tough load and impact condition such as steel mill ( ....

Stainless Roller Chain

Hitachi Stainless Roller Chain are made of SUS300, and recommended for application under severe environment such as acid or alkaline environment, with....

Super Roller Chain

Hitachi Super Roller Chain is designed to make outstanding resistance against fatigue and impact.

Plated Roller Chain

Hitachi provides Nickel plated and LL ( special surface treatment) plated Roller Chain for higher corrosion resistance than regular ANSI Roller Chain.

Hitachi HE Roller Chain consist of thicker link plate than ANSI Roller Chain and stronger pin with hi strength steel, which creates higher tensile strength and higher fatigue....

Hitachi BS roller Chain is made according to British Standard.

Roller Chain

ANSI Roller Chain is standing on JIS B 1801. The uniqueness includes SBR ( Solid Bushing & Roller) having no seam on bushing and roller which creates outstanding....

Flexible couplings: grid coupli
ngs
WINFLEX 9000

EASY SETTING UP
LONG LIFE LUBRICATION

Improvements
- 15 standard sizes in stock: 950 to 230 Nm.
- Maximum bore 380 mm.
....

Flexible couplings:

curved-tooth gear couplings

5 - 2 500 Nm | BoWex ® Series
- Curved-tooth gear coupling
- Torsionally stiff, double cardanic
- Material combination: ....

# The couplings are highly elastic, backlash free, absorb shocks and dampen vibrations.

# Inherent Overload Protection and high misalignment capacity.

# Choice of tyres -....

Flexible couplings: elastomer couplings
à ¸ max. 186 mm, max. 15028 Nm | Rexnord Omega ® | Viva ® Rexnord Industries, LLC

* flexible coupling: elastomer coupling à ¸ max. 186 mm....

Flexible couplings: jaw couplings
7.5 - 35 000 Nm, ATEX | ROTEXÂ ® Seri
es
- Torsionally flexible jaw-type coupling
- Axial plug-in, good dynamical features
- Failsafe, ....

# High load capacity
# Compact size
# Operate in Wide Temperature Range

Coupling / Spacer for Addax Cooling Tower Drive Shaft Model LRF450.275