Specification :

BURKLE, Mini Sampler PE, cat. 5305-0100

* Also suitable for viscous oils
* Complete in a practical transport case

MiniSampler PE complete with accessories in transport case. Contents:

* Vacuum pump
* 10 PE bottles 100 ml
* 10 m PE suction hose 6 x 8 mm
* 1 1 hose cutter
* 1 hose weight made of stainless steel AISI 304 ( 1.4301)
* 20 seal-it bottle seals

With the MiniSampler the sample liquid only comes into contact with the suction hose and the sample bottle. The possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed. The single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small diameter ( 8 mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible. Two models are available: MiniSampler PE for general sampling, max. suction lift 5 m* ; MiniSampler PTFE for ultra-pure sampling, max. suction lift 5 m* * depending on medium.

Ideal for general sampling from drums, canisters, tanks, etc. Not for aggressive acids. Vapors could destroy pump.

Operation

1. Place hose and bottle in pump.
2. Insert hose end to desired sample depth.
3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
4. Take off the filled bottles, close and label them.