Welcome to
Global Pro Audio
Free Member
Global Pro Audio
Indonesia
Home
Company Info
Contact Us
Trade Offers
[113]
Selling Offers
[113]
Share your thoughts
Write a review
Recommend to your friends
Language
English
Indonesia
Sell
Meyer Sound Stella-8C : Installation Loudspeaker
Quantity Order:
Origin:
United States
Stella-8C : Installation Loudspeaker
The Stella-8C ceiling mount installation loudspeaker is a self-powered loudspeaker engineered primarily for use in Meyer Sound’s Constellation electroacoustic architecture. Housed in an aluminum die cast enclosure with a heatsink on the back, the Stella-8C can be flush-mounted in ceilings and walls with standard backboxes for 8-inch drivers (with a minimum depth of 6.5 inches).
The Stella-8C delivers similar acoustical performance as the Stella-4 and Stella-4C loudspeakers, but with expanded output capability and wider coverage. The unit's 8-inch coaxial cone and 0.75-inch tweeter transducers can produce a maximum peak SPL of 117 dB at one meter over a wide frequency range of 100 Hz to 22 kHz. The Stella-8C contains amplification and signal processing onboard and exhibits the same low distortion, high intelligibility, and flat frequency and phase response for which Meyer Sound products are known. As a self-powered loudspeaker, the Stella-8C offers simplified installation for the multichannel output of Constellation systems or other installation applications.
Balanced audio and DC power are fed to the Stella-8C from a 5-pin Phoenix connector on its rear panel. Meyer Sound's patented Iso-Input transformer-isolated differential input circuit yields a high common mode signal rejection ratio (CMRR). Powering the unit from a unipolar 12 to 18 V DC external power source reduces induced noise significantly, while the use of a low voltage supply eliminates the need for wiring conduits.
The required method for delivering balanced audio and DC power to the Stella-8C is with the Stella-188 external power supply. The single-space 19-inch rack unit can accommodate up to eight Stella-8Cs (one per channel output). The Stella-188 receives eight channels of balanced audio from its 25-pin D-sub connector and routes the audio, along with 18 V of DC power, to its 5-pin Phoenix output connectors for greater wiring convenience. Cable runs to the Stella-8C of up to 150 feet are possible with just 1 dB of loss in peak SPL using 18 AWG wire.
The use of composite multiconductor cables (such as Belden 1502R) allows a single cable to carry both audio and DC power from the Stella-188 to the Stella-8C. The Stella-8C amplifier and signal processing circuits are designed to tolerate voltage drops of up to 30 percent, thereby accommodating light-gauge cables and long cable runs. Internal energy storage circuits minimize the system's peak-to-average current demands, ensuring efficient use of the Stella-188's 18 V DC output.
Recommend to your friends
showing 34 of 113
Prev : Tannoy V300
Next : Meyer sound Stella-4
You have [
3
] new inquiries
.
Go to Member Menu
Home
-
Trade List
-
Product List
-
Inquiry List
-
Cooperation List
-
Company List
Copyright © 2024
Indotrade.co
. All Rights Reserved.