Electrode Cigweld Cobalarc 650 Basic type manual arc welding electrode. Resistant to hard particle abrasion and moderate impact loading. Air hardening, crack free, martensitic steel deposit Developed in Australia Description and Applications: Cobalarc 650 is a basic type electrode for the hard surfacing of steel components subjected to wet or dry hard particle abrasion and low to moderate impact loading. The air hardening, low alloy steel deposit of Cobalarc 650 remains crack free on most steels under normal welding conditions and is therefore recommended for hard surfacing components subject to flexing during service. The basic flux coating gives excellent resistance to rust, mill scale, dirt and oil on the surface being hardfaced. Typical applications include the surfacing of agricultural points, shares and tynes, grader and dozer blades, conveyor screws and post hole augers etc. Typical all weld deposit analysis: C: 0.58% Mn: 1.1% Si: 0.6% Cr: 5.3% Mo: 0.25% Typical weld deposit hardness: HRC HV30 Single Layer on Mild Steel 55 600 All Weld Metal Deposit 57 640 Contact Person : Sutrisno 08121026150