We supply HOBART : Champion 4500 Champion 4500 Champion Elite Champion Elite Generator Power 4500 Surge, 4000 Continuous 11, 000 Surge, 9500 Continuous Receptacles, CSA ( 2) 120 V, 20 A ( 2) 240 V, 20 A ( 4) 120V, 20A ( 1) 120/ 240 V, 50A ( 1)

Price:

nego

Quantity Order:

Origin:

United States

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

limited

Pack. & Delivery:

box

Champion 4500
Champion 4500 Champion Elite
Champion Elite
Generator Power 4500 Surge, 4000 Continuous 11, 000 Surge, 9500 Continuous
Receptacles, CSA ( 2) 120 V, 20 A
( 2) 240 V, 20 A ( 4) 120V, 20A
( 1) 120/ 240 V, 50A
( 1) 240V, 50A
Circuit Breakers / Weld Control Yes, Resettable Single Knob Yes, Resettable Coarse/ Fine Control Knobs
Welding Amperage Range 60 - 140 A AC 50 – 210 DC
50 – 225 AC
Weld Thickness 1/ 4 in. 1/ 2 in.
Weld Cables 10 ft Electrode Cable with Holder
10 ft Work Cable with Clamp none
Duty Cycle 30% @ 140 A, 20 V
60% @ 100 A, 25 V
100% @ 90 A, 25 V 100% @ 225 A, 25 V - AC
100% @ 210 A, 25 V - DC
Engine/ Fuel Capacity 10 HP Briggs & Stratton® OHV / 1 gal 23 HP Kohler OHV / 12 gal
Engine Start Recoil Electric Start/ Auto Idle
Warranty / Engine 2 year 3 year
Warranty / Welder 5/ 3/ 1
Industrial Use 5/ 3/ 1
Industrial Use

EZ-TIG 165i
EZ-TIG 165i
Rated Output 150 A @ 16 VAC
150 A @ 16 VDC
At 20% Duty Cycle
Welding Amperage Ranges 10 – 165 A
Max. Open-Circuit Voltage 80
Amps Input at Rated Output AC-230V: 21A
DC-230V: 23A
Warranty 5/ 3/ 1 Industrial Use

Stickmate 205 AC
Stickmate 205 AC Stickmate LX 235 AC
Stickmate LX 235 AC Stickmate LX 235 AC / 160 DC
Stickmate LX 235 AC / 160 DC
Process AC Stick AC Stick AC Stick / DC Stick
Welding Amperage Range AC 30 - 205 A 30 - 235 A 30 - 235 A AC
Welding Amperage Range DC N/ A N/ A 30 - 160 A DC
Input Voltage 230 VAC 230 VAC 230 VAC
Weld Thickness 3/ 8 in 1/ 2 in 1/ 2 in AC, 1/ 4 in DC
Duty Cycle 20% at 165 A
100% @ 90 A 20% @ 225 A
100% @ 100A 20% @ 225 A AC,
100% @ 100 A AC

20% @ 150 A DC,
100% @ 60 A DC
Cable Length 15 ft Electrode Cable with Holder
10 ft Work Cable with Clamp 15 ft Electrode Cable with Holder
10 ft Work Cable with Clamp 15 ft Electrode Cable with Holder
10 ft Work Cable with Clamp
Amperage Adjustments 1 A Increments 1 A Increments 1 A Increments
Range Selection Single High/ Low High/ Low AC DCEN/ DCEP
Electrodes 1/ 16 in - 5/ 32 in 1/ 16 in - 5/ 32 in 1/ 16 in - 5/ 32 in
Warranty 5/ 3/ 1 Industrial Use 5/ 3/ 1 Industrial Use 5/ 3/ 1 Industrial Use

Wire Welding Accessories
Running Gear / Cylinder Rack Carts for MIG Welders
Running Gear / Cylinder Rack Carts for MIG Welders

Holds large or small cylinder ( not included) with tray underneath for cables.

* # 194776 Small Cart
* # 770187 Large Cart

Nozzle Gel
Nozzle Gel

Prevents adhesion of weld spatter to MIG nozzle and weld surface.

* # 770074

MIG Pliers
MIG Pliers

This universal multi-function tool is ideal for welding, electrical, mechanical, farm and home use. It includes a wire cutter, nozzle cleaner, tip remover, nozzle remover, small hammering surfaces, needle nose pliers, comfortable grips and a spring loaded handle.

* # 770150

Regulator, MIG
Regulator, MIG

Rugged MIG regulator constructed of solid corrosion-resistant brass features 2" -diameter gauges, forged brass bonnet, durable Teflon® design, and dual filters for high-pressure seat protection. 100% tested for dependability. Made in the USA by Smith.

* # 770198

Compressed Shielding Gas
Compressed Shielding Gas

20 cu. ft. of 75% Argon/ 25% CO2 shielding gas in an industrial-grade cylinder. Valve has CGA 580 fitting. Excellent performance on thin materials with a clean weld appearance. Refillable.

* # 770199

Portable CO2 Cylinder Kit
Portable CO2 Cylinder Kit

Kit includes empty 20oz. cylinder, fixed flow regulator, gas hose, holder, strap, mounting hardware, spare o-rings and instructions. Greater portability and economical alternative to large cylinders. MIG welding with CO2 produces clean welds. Approx. 40 min. weld time. 2 year limited warranty on regulator. Fits most Handler units and can be adapted for others.

* # 770626

Replacement Liners
Replacement Liners

* # 194014 Nylon Liner
* # 196139 .023-.035"
* # 196140 .035-.045"
* # 210970R .023-.035"

Contact Tips Set 1
Contact Tips Set 1

For Miller Millermatics; Hobart Handler 125, 135, 140, 175 & 180, IronMan 210 & 250, later Beta-MIG 1800 & 2510

* # 770174 .023" ( 0.6 mm)
* # 770177 .030" ( 0.8 mm)
* # 770180 .035" ( 0.9 mm)
* # 770183 .045" ( 1.2 mm)

Contact Tips Set 2
Contact Tips Set 2

For Tweco, Lincoln Electric Magnum, Miller Gold Seal, Craftsman, Campbell-Hausfield, Binzel. Also for Century and other brands with Tweco or Binzel-type guns.

* # 770175 .023" ( 0.6 mm)
* # 770178 .030" ( 0.8 mm)
* # 770181 .035" ( 0.9 mm)
* # 770184 .045" ( 1.2 mm)

Nozzles ( Pkg. of 1)
Nozzles ( Pkg. of 1)

* # 770404 1/ 2" ( 13 mm) For Handler 125, 135, 140, 175, 180, 187 & 210, IronMan 210
* # 770405 5/ 8" ( 16 mm) For IronMan 250 only
* # 770544 1/ 2" ( 13mm) For IronMan 250 only

Tweco Nozzle
Tweco Nozzle

For Lincoln, Century, Craftsman, and other products using Tweco screw-on nozzles.

* # 770203

Contact Tip Adapters ( Pkg. of 1)
Contact Tip Adapters ( Pkg. of 1)

* # 770402 For Handler 125, 135, 140, 175 & 180, IronMan 210
* # 770403 For IronMan 250 only

Stick Welding Accessories
Electrode Holders
Electrode Holders

* # 770026 Solid brass spring-loaded jaws accept rods up to 3/ 16" in 45, 90, or 180-degree positions.
* # 770027 Solid brass spring-loaded jaws accept rods up to 1/ 4" in 45, 90, or 180-degree positions.
* # 770028 Accepts rods up to 5/ 16" . A quarter turn of the handle loosens the rod for removal or replacement. Electrodes burn within 1" from the head and can be bent to any angle and still be held secure. Compact design accepts # 2 cable.

Electrode Storage Can
Electrode Storage Can

Keeps electrodes fresh and dry with an airtight seal. Convenient belt clip and internal divider with four separate storage areas. Electrodes not included.

* # 770073

Welding Electrodes
Welding Electrodes

* # 770456 3/ 32" 6011 - 5lb.
* # 770457 1/ 8" 6011 - 25 lb.
* # 770458 3/ 32" 6011 - 10 lb.
* # 770459 1/ 8" 6011 - 5lb.
* # 770460 1/ 8" 6011 - 10 lb.
* # 770461 5/ 32" 6011 - 25 lb.
* # 770462 5/ 32" 6011 - 5 lb.
* # 770463 5/ 32" 6011 - 10 lb.
* # 770464 1/ 8" 7014 - 5 lb.
* # 770465 1/ 8" 7014 - 10 lb.
* # 770466 3/ 32" 6013 - 5 lb.
* # 770467 3/ 32" 6013 - 10 lb.
* # 770468 1/ 8" 6013 - 25 lb.
* # 770469 1/ 8" 6013 - 5 lb.
* # 770470 1/ 8" 6013 - 10 lb.
* # 770471 5/ 32" 6013 - 25 lb.
* # 770472 5/ 32" 6013 - 5 lb.
* # 770473 5/ 32" 6013 - 10 lb.
* # 770474 1/ 8" 7018AC 5 lb.
* # 770475 1/ 8" 7018AC 10 lb.
* # 770477 1/ 8" 7018 - 25 lb.
* # 770478 1/ 8" 7018 - 5 lb.
* # 770479 1/ 8" 7018 - 10 lb.
* # 770480 5/ 32" 7018 - 5 lb.
* # 770481 5/ 32" 7018 - 10 lb.
* # 770484 5/ 32" 7014 - 5 lb.
* # 770485 5/ 32" 7014 - 10 lb.
* # H112216-R01 1/ 16" 6011 - 1 lb.
* # H112232-R01 3/ 32" 6011 - 1 lb.
* # H112244-R01 1/ 8" 6011 - 1 lb.
* # H114216-R01 1/ 16" 7014 - 1 lb.
* # H114232-R01 3/ 32" 7014 - 1 lb.
* # H114244-R01 1/ 8" 7014 - 1 lb.
* # H117119-RDP 1/ 16" 6013 Qty 38
* # H117125-RDP 5/ 64" 6013 Qty 23
* # H117132-RDP 3/ 32" 6013 - 1 lb.
* # H117144-RDP 1/ 8" 6013 - 1 lb.
* # H119832-R01 3/ 32" 7018AC 1 lb.
* # H119844-R01 1/ 8" 7018AC 1 lb.
* # H119916-R01 1/ 16" 7018 - 1 lb.
* # H119944-R01 1/ 8" 7018 - 1 lb.

Specialty Electrodes

Hobart Specialty Electrodes offer ease-of-use and weldability for maintenance and repair of all types of metals. Each clearly labeled package holds a typical number of electrodes needed to do a small job.
Stainless 312 Plus Electrodes

For hard-to-weld or dissimilar metals, stainless, high-carbon, cast, and high-nickel steels. All position, AC/ DC ( electrode positive) , easy strike and re-strike, high moisture resistance, self-detaching slag.

* # H480644-RDP 1/ 8" Qty 5

Stainless Steel Electrodes - 308L

For 308 and 304 stainless base metal. Smooth, tough welds with the strength, corrosion and crack resistance needed for welding stainless steel in all positions. Easy slag removal. AC or DC electrode positive ( reverse) polarity.

* # H481930-RDP 3/ 32" Qty 5
* # H481944-RDP 1/ 8" Qty 5

Nickel 99 Electrodes

This high nickel content electrode is good for castings of light to medium weight. Welds are easily produced in all positions and the deposits are readily machined. AC/ DC ( electrode positive) . Preheating is mandatory. Cool slowly in still air.

* # H500531-RDP 3/ 32" Qty 10

Nickel 55 Electrodes

For repair in all positions of materials with 55% nickel cast iron. This electrode produces welds with higher strengths and ductility than the straight nick electrodes. Deposits are machinable, but harder and more resistant to cracks and abrasion than high-hickel welds. AC/ DC ( electrode positive) . Preheating is mandatory on cast iron.

* # H500631-RDP 3/ 32" Qty 10
* # H500644-RDP 1/ 8" Qty 4

Hard Surfacing Electrodes, Build-up

High-chromium carbide alloy steel electrode used for build-up on carbon, low-alloy or austenitic manganese metals. Excellent abrasion resistance, good impact and improved corrosion resistance. AC/ DC ( electrode positive preferred) . For 1/ 2" to 3/ 4" base materials, preheat to 200ý F and cool slowly.

* # H542144-RDP 1/ 8" Qty 4

Hard Surfacing Electrodes, Overlay

High-chromium manganese-alloy electrode used for buildup and overlay. Used for austenitic, carbon and low-alloy steel. Excellent impact resistance, good abrasion resistance and improved corrosion resistance. AC/ DC ( electrode positive preferrred) . For 1/ 2" to 3/ 4" base materials. Preheat to 200 ý F and cool slowly.

* # H544051-RDP 1/ 8" Qty 4

Aluminum Electrodes - 4043

Aluminum welding for flat, horizontal and vertical applications. DC ( electrode positive) only.

* # H722844-RDP 1/ 8" Qty 10

Cutting/ Chamfering Electrodes

For cutting, beveling, or gouging of all metals and removal of weld joint overlays or other unwanted materials. All-position, AC/ DC ( electrode positive) .

* # H990001-RDP 3/ 32" Qty 4

Nomacast Electrodes

For various grades of cast iron, this electrode provides an excellent, non-machinable base pass for subsequent nickel alloy repairs on contaminated cast iron. AC/ DC ( electrode positive preferred) .

* # H990003-RDP 1/ 8" Qty 14

Please Contact :
saleskehan@ gmail.com
081807489548
PT. KEHAN SUPPLY
serving industry, mining, and oilfield
62 21 92935340 ; 62 21 5602582

Recommend to your friends