S1000R-RP

Quantity Order:

Standarded configuration:
1
The sickness of the works is controlled by computer, its operation is adopted the push-button style, which are high accuracy and steability;
2
There is a safety-controlled device at the initial end of the feed.
3
The swing of the sand belt is controlled by the cylinder , which can avoid the belt affected by the dust and the off- power. Meanwhile the cylinder can make a even and steady swing.
4
The machine is equipped with a display device of 5-loops.
5
The first sanding belt is adopted the steel roller of 190mm diameter , a big removing quality and high accuracy.
6
The second sanding belt is equipped with the 70 shore rubber roller of 165mm( diameter) , besides, a sanding pad is added in it , which ensure a big removing quality and a high polishing effect .
7
The hanging plate and roller foot is made of casting iron , which can minminimises the noise and maximizes the stability and the strength.
8
The main power moter is started on the model of triangle automaticly
9
The press shoe is equipped with the welded steel frame and has been processed in a special way, high accuracy and good wearable .
10
There are the pressing rollers among the press shoe, these rollers can reduce the friction between the plate and the shoes , which ensure a stable operation.
11
The shoes can adjust the pression, which can resove the problem of camber between the odds of the thicker material and the plate .
12
The back sanding belt is adopted the automatic dust-blowing device, which can length the life of the sand belt and improve the polishing quality .
13
The bearing is Japanese NSK bearing , the electronic devices is imported.
14
French Schneider electronic device for all the machine .
15
The material of the conveyor bed is Granite, high wearable and never twist.

Recommend to your friends