Products Catalog

Specification

Standing Seam Roll Forming Machine, Bemo Sheet Roll Forming Machine:

Main Parameter of the standing seam machine :

1) Steel Material: Q235, 2) thickness of material: 0.4-0.8mm3) Feeding Width Max: 610mm

4) Capacity of Decoiler: 5000 kg

5) Inner Diameter of the Coiler: 500-600mm

6) Outer Diameter of the Coiler: 1800mm

7) Forming steps: 15 steps

8) Driving System: Chain Transmission

9) Power of main motor: 5.5kw 3phases, 415V, 50Hz

10) Reducer: Cycloid Pin

11) Power of Hydraulic cutting Machine: 3kw

12) Forming Speed Max: 15m/ min

13) Dimension ( L* W* H) and Layout:

Manual Decoiler: 1.1m* 1.8m* 1.2m

Main Machine: 7m* 1.5m* 1.3m

Runout Table: 4m* 0.6m* 0.8m

Main Configuration

SR.Main ConfigurationQ’ tyDescription

1Manual Decoiler1Manual Expansion, 5T Capacity

2Main Forming Set1Chain Transmission, Motor, Green

3Cutter1Hydraulic, PLC Control

4Controller1PLC, Encoder, Touch Screen, Transducer, 5Hydraulic System1PLC control

6Runout TAble1simple

7Electric components1 setBreaker, contactor, limit switch, Relay

8Guard Cover1For the Chain, Yellow

9Seaming machine1To joint the panels for installationi

Process and Features

Decoiler — Guiding — Roll Forming — Encoder — Hydraulic Cutter — run out table

process of the standing seam roll forming machine

1. This M/ C adopts inner-expansion manual decoiler. The diameter can be adjusted

through the adjusting bolt according to the coil’ s inner diameter. The operation

is quite easy. The decoiling speed is to the main machine’ s forming speed.

2. The main frame is structured by welding entire T shape steel. The side stands

are welded on the frame, and to clear the stress by vibration in order to

maintain the rigidity and stability of the machine.

3. The forming rollers are made of GCr15 bearing steel through a series of heat

treatment such as forging, distressing anneal, high frequency hardening( the

degreed is 8-10mm) , backfiring, phosphorization etc. The surface of the rollers

can reach the rigidity of HRC58-62. All the forming rollers are process on CNC

lathe, by which the accuracy can be granteed.

4. The main shaft is made of 40Cr advanced alloy steel after a series of heat

treatment such as high frequency hardening, quenching and tempering etc and

processed on lathe, burnishing the surface, wire cutting the channel to make it

high accuracy and large capacity.

5. Cut to length is the last process of this machine line. It cuts accurately to

any length you set on the PLC. The cutter consists of Hydraulic diver, profiled

blade and cutter frame. The blade is made from Cr12 cold punching steel after

strict process. It adopts 45 degree staggering cutting. This costs no waste and

can hold the cutting profile a good shape. And this cutting is of high accuracy.

6. The machine adopts Mitsubishi FXIS series industrial PLC, Mitsubishi GOT-F

series touch screen, Panasonic VF series Transducer and Omron encoder. The

entire electric components are of good stability and long life.

--------------------------------------------------------------------- -----------

Contact Name: MR.Tony Tang
Company Name: Shanghai Allstar Industrial Co., Ltd
Email/ MSN: tanglei_tony@ hotmail.com
Tel: 0086-15021983542 or 86-21-67353838
Fax: 0086-21-57350108
Street Address: No.395 Jingbo Road,
Fengjing Town, Jinshan District,
Shanghai, China 201501
Website: http: / / www.ranger-sh.com
Country: China
Business focus: Roll Forming Machine, C/ Z/ U/ W/ Hat Furring Purlin Forming Machine, Roof Tile Forming Machine, Corrugated Forming Machine, EPS/ PU/ Rockwool Sandwich Panel Production Line