Specification :

# Stock Number: GPMA1112
# Wingspan: 36 in (915 mm)
# Wing Area: 222 in² (14.3 dm²)
# Weight: 7.5-9 oz (215-255 g)
# Wing Loading: 4.9-5.8 oz/ft² (15-18 g/dm²)
# Length: 30.5 in (770 mm)
# Includes: T-370 motor, 5:1 gearbox, prop
# Requires: 4-channel radio w/3 micro servos (10 grams or less), 10-amp ESC, 3S 640mAh LiPo battery pack, charger

# Control Horns
The control horns have a larger than normal hole that fits the Z-bend pushrod connector without slop. The control does double duty as a hinge, reducing weight and assuring correct linkage geometry.

# Landing Gear
Molded strut supports hold the 2 mm carbon rod landing gear legs in position. They're also braced at the fuselage, wing and wheels for a strong, properly reinforced landing gear.

# Amazing Control Throw
Large servo arms and control horns offer up to 80 degree deflection.

# Clip-Hinge System
Clip-Hinges allow control surfaces to pop off in a crash and avoid damage.

# Z-Bends
A large bearing surface on the Z-bends reduces wear to prevent slop, unlike linkage systems that rely on small wire Z-bends. To make installation simple, the 1 mm carbon rod is secured in the Z-bend with a drop of CA.

# Tailwheel
The tail gear pivots on the carbon fin post, allowing the snap-in tailwheel to steer the airplane while on the ground.