1. The tank in this type of soldering pot is made of quality cast-iron, and their electric heating tubes are concealed to protect against damage.
2. Application: electric wire, ....

FEATURES :
1. Automatic thermpo control in separated design.
2. High quality with efficient performance.

FEATURES :
1. Additional function to monitoring the pollution of flux
2. Automatic re-fill flux or thinner in a ratio-controlling manner.
3. Digital display for flux density....

FEATURES :
1. Automatically control the flux density in wave soldering machine
2. Automatic controller that control flux density with ratio control technology,
3. The....

FEATURES :
1. High quality Alloy steel SKH-2 is used for cutting blade, durable and long life.
2. Micro-Processor controlled stepping motor is installed to program the....

FEATURES :
1. With no banding stress design idea to operate V-Cut PCB separated process. Lay down PC board.Rotary movement blade, Separated PCB without stress.
2. Cutting....

FEATURES :
1. This machine is designed and built to re-sharpening the tungsten carbide blade that used in PCB lead cutting machine.
2. Five Main portions: 1. Main frame of the....

FEATURES :
1. Automatic brushing the PCB, 2 sets of brush-rollers designed to ensure the surface of PCB can be cleaned completely.
2. The speed, height and cleaning angle of....

FEATURES :
1. The machine is designed to brush away the leads or soldering residues like solder ball and flux residues, etc, which remains on the board after lead cropping....

FEATURES :
1. The machine is designed to trim the wire leads of PCB assembly after soldering proces.
2. The fast turning tungsten carbide blade cuts the wire leads while....

1. The equipments of the standard production process.Solder mixed uniformed and mixed 2 bottles at same time.
2. Informed by light and image when the process is finished.Display....

1. High-speed Centrifuge Machine
2. This machine available all brand SMT spot tapped tube to remove the bubble inside of the tube.
3. It could arrange 4 pcs. tubes with spec.142....

Key Features:
1. SMT-402 sucks SMT components to
dispense ( spot glue) and place on PCB.
2. Operation with step pad switch to spot
glue SMT components rapidly, Easy-
change....

Key Features:
1. SMT-401 is great for sample design, especially for changeable small quantity diverse production.
2. Suck quickly SMT components and place on the PCB.
3.....

1. The machine was designed to depanel pre-scored panelboards carefully, without bending or tension stress.
2. Even sensitive SMD-Components like ceramic capacitors, will not be....

1. RF-101C = ( RF-101CA) + ( RF-101CB)
2. RF-101C Kinking/ Punching die is equipped upon requested shape and specification as standard equipment. The various punching....

1. Counting in both directions ( Left or right) .
2. Divider from 1 to 10 ( up to 19upon request) .
3. Totalize mode counting.
4. Pre-set mode counting ( with an audible signal....

1. 3 Seconds for one stick
2. The most efficient way to strengthen the IC lead.
3. High productivity by rolling operation.
4. Adjusting the I.C. forming width by knob switch....

1. The Both Lead length ( H) is fixed and the same. If need the Lead width ( L) in 2.5-42mm, kindly specify the requirement in order.
2. Automatic material feeding system. fully....

â € ¢ Forming and auto-taping at the same time.
â € ¢ Counter and Speed adjustment ( VR) are included.
â € ¢ Stop automatically while tapes run out.
â € ¢ Easy operation and....