Specification :

1. Shear mode, Piezo On-Demand Print Head ( Konica printhead)
2. 512 Nozzle with 360 dpi Spacing
3. Compatible with Solvent, UV, Oil...
4. Enabling Comapct Design of Head Mount System

Detailed introduction to Konica 512-42pl print head:

Konica Print Heads made in Japan are available.

Konica Minolta 512/ 42pl, 512/ 14pl Print Heads

* Shear mode, Piezo On-Demand Print Head

Designed for the graphics and industrial markets and with a proventrack record in wide format printing and " coding and marking" the XJ128 is the ideal entry level piezo inkjet " drop-on-demand" product.

* 512 Nozzle with 360 dpi Spacing

High resolution, 360 nozzle per inch spacing has enabled arranging512 Nozzle on a comactly designed print head. The KM512 series consistsof type L, M and S, corresponding to unit drop volume capabilities of42pl, 14pl and 4pl respectively. The type M and S can be driven in 4level grey-scale mode for reproducing high quality images with smoothertones.

* Compatible with Solvent, UV, Oil...

Due to its specially designed internal structure, the KM512 seriesboasts a wide range of ink compatibility, including aggressive solventinks typically used for super-wide format printers. Inks which havehigh viscosity at room temperature, such as UV ink, can be heated up to55 degrees Celsius with the H type' s internal heater.

* Enabling Comapct Design of Head Mount System

This series is specially designed to have a wing tructure so thatusers can precisely align the print heads without difficulty. Thisfeature allows easy combination of page-width printhead units for thepurpose of single-pass high-speed printing. The same external designallows interchangability of different type heads on the same mountsystem