Specification :

Application Field:
Be used in: 1. PCB 2.Heat sink
The Product Sells Point
The S6700 series is a RoHS compliant, positive snap action, single pole / single throw, sub-miniature bimetallic thermostat which provides accurate and reliable sensing and switching in a single device.
The S6700 series may be automatically placed and soldered onto PC boards with high speed automated
equipment, eliminating the need for the expensive hand placement and termination required today for most power supply thermostats.
The S6700 provides fast, positive response with excellent repeatability. The thermostat has a switch capability of up to 1 amp for 48 VDC or 120 VAC for 30, 000 cycles, and achieves low-level switching down to 0.001A to 0.020A at 5 VDC for 100, 000 cycles. Temperature is pre-set at the factory and is non-adjustable in the field.
The S6700 series is ideally suited for use on crowded PC boards. Typical uses include turning
on an indicator light, sounding an audible alarm, switch on a control circuit to send a message to a display screen or even switching a circuit to shut down a system. Applications include power supplies, computers and computer peripherals, aircraft, automotive, medical devices and test equipment.

Key Specifications/ Special Features 
Contact Resistance:
100 milliohms max ( before and after rated life)
Contact Ratings:
Cycles Voltage Amps ( resistive)
30, 000 48 VDC 1.0
30, 000 120 VAC1.0
100, 0005 VDC 0.020
100, 0005 VDC 0.001

Contact Operations:
Either close on rise ( make) or open on rise ( break)
Operating Temperature Range:
40° C to 120° C ( 104° F to 248° F)
Standard Operating Temperature Tolerance:
± 5° C ( ± 9° F) nominal operating temperature settings
in 5° C increments
Long Term Exposure Limit:
-55° C to 160° C ( -67° F to 320° F)