The SG5002 SG5003 SG5008 SG5009 high current resistance meters are special designed for high performance measurement of high inductance, low value resistances such as transformer....

High voltage Impulse Tests are used to assess the quality of any
high voltage equipment. The test object is subjected to a fast
voltage impulse of defined wave shape and changes....

RE-2302 model recurrent pulse generator is a sort of equipment simulating various pulse waveforms, through the selecting switch change the pulse line different parameters, you can....

The sphere gap type SGS H or SGS V can be used for Impulse, AC and DC voltage calibration according to the IEC 60052 recommendation.

The spheres are arranged vertically or....

The multiple chopping gap is used to chop lightning impulses on the front and/ or on the tail.

The multiple chopping gap serves simultaneously as a load capacitor for the....

This precision test cell measures the dielectric properties of liquid insulants like insulation oil etc.

The test cell is designed as a vacuum-sealed cylindrical capacitor with....

SG7501 Oil Dissipation Factor and Resistivity Meter is used to measure dissipation factor, dielectric constant and resistivity for oil. The set is all-in-one structure, with....

SG-V series DC Hipot Testers provide an economical solution to DC field testing of power cables, terminations, motors, generators and other electrical apparatus. Both models....

The TMS3000 is a computer controlled high precision measuring system for power transformers. The system has distinguished itself in the rugged environment of the transformer test....

For many electric equipments used in power system and enterprises, inner insulation is mostly oil-insulated. Oil dielectric strength test is one of the essential routine tests.....

On-site testing of turns ratio is an important basic measurement for power transformer diagnosis. It helps to detect faulty transformer windings as well as defective tap changer....

SG9101 Interference Distinguishing Partial Discharge ( PD) Detector is a new type apparatus developed by the institute after SG-8001 ( modeled from Model-5) , SG-8201 and SG-8601....

The SG4003 is the effective solution for routine pass/ fail partial discharge testing. It has the basic functions of an analog detector and meets all IEC and IEEE/ ANSI standards....

SG4008 multi-channel digital partial discharge measuring system developed by SAMGOR up to minutes, which have powerful anti-interference capability and up to six channels. It can....

This precision test cell measures the dielectric properties of solid insulants like paper, plastic foil, etc.

Basically the test cell consists of a heatable, shielded plate....

QS30 is designed for highest precision determining the capacitance and dielectric dissipation factor tand of liquid and solid insulants, cables, capacitors, line transformers, ....

SG2008 Automatic 12kV Capacitance & Dissipation Factor Test Set is designed to measure dissipation ( Dielectric Loss Angle tg ´ ) or power factor ( cosà † ) in heavy....

TAWF series coupling capacitors are used as resonant system base load, separation of PD signals from the high voltage, measuring AC voltages and attenuating interferences from HV....

The SF6 gas insulated standard capacitor is used together with a C and tan delta measuring bridge as the comparison standard leg of the bridge. It is used as Capacitance standard....

Resonant Test Systems, type SGM is applied for the generation of a continuously variable alternating ( AC) voltage of a fixed frequency ( mainly 50 or 60 Hz) for high-voltage ( HV....