Specification :

Hot melt sealant extruder

It is designed for hot melt of insulating glass, easy operation and simultaneous extrusion from two outlets, both manual and automatic operation available.

It is designed for the hot melt of insulating glass with aluminum spacer. It is of the second generation of equipment l. It is small and light, easy to operate and repair and has stable control over temperature. Operation can be carried out after preheating of half an hour.

Technical Parameter:

Power Supply: 380V/ 50Hz
Heating Power: 5.5Kw
Speed Of gun output: 0.4Kg/ min
Overall Dimensions: 550mmX500mmX920mm

Technical Characteristics
35kg Hopper Capacity
1kg/ min Output
3m High-Quality Hose
4 Zones Temperature Control
Low Temperature Protect
Wear Gear Pump with " Easy to Repair" Sealing System
Platinum Thermocouples
Stainless Steel Heating Rods
" Cool to Touch" Moulded Gun Handle
Leakage Protection
Infinite Speed Variation
Low Energy Consumption
Plastic Spraying Machine Body
2.2m× 1.6m/ 2.2m Application Table Optional

Technical Data:
Voltage: 220V/ 1Phase
Frequency: 50/ 60Hz
Total Power: 4kW
Motor: 0.37kW
L/ W/ H: 730mm× 470mm× 1080mm