Specification :

Application:
PCL-Vertical Shaft Impact Crusher is applied widely for the powder process of mineral product including mental and non-metal ore, fireproof material, bauxite, diamond dust, glass raw materials, architectural materials, artificial sand and all kinds of metal ore materials, especially which has more advantages than any other machines in processing the more and most hard materials.

Features and Benefits:
Æ Simple structure and low cost
Æ High efficiency and low consumption
Æ Primary and second crushing capacity
Æ More and most hard materials can be crushed
Æ Cubic shaped final product
Æ Little noise and dust pollution
Æ Convenient performance, maintenance, installation

Working principle:
The Whole PCL vertical shaft impact crusher includes feed hopper, classifier, whirl pool cavity, impeller, main bearing assembly base, transmission device and motor etc. Operating principle is as follows: the materials enter the crusher through feeder hopper, which is divided into two parts, one part through the middle of classifier entering into the rotating impeller at high speed, then accelerated, whose speed can reach hundreds of acceleration, then is shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around classifier, then impact on the whirlpool cavity’s scaleboard together, then will be rebounded and impact on the top of the whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crusher, milled twice or more times in the whirlpool cavity, then crushed materials will be excluded through the bottom discharging hole. This can from a closed circulation through the circular classifier system; in general, materials can be crushed into 20 mesh through thrice circulation. Airflow self-circulation in the whirlpool cavity can eliminate the dust pollution well.

Specification
Model Max. feeding (mm) Power(Kw) Impeller speed (r/min) Capacity
(t/h) Outer dimension
:L×W×H
(mm) Weight(T)
PCL-600 26 2×30 2000/2600 8-50 3300×1500×205 0 5.4
PCL-750 35 2×45 1500/2500 25-55 3300×1800×2440 7.3
PCL-900 30 2×(55-75 ) 1300/1700 55-120 3600×2140×2620 12.1
PCL-900B 40 2×(75-110) 1000/1450 60-1 50 3600×2140×2620 13.6
PCL-1050 40 2×(90-110) 1000/1700 100-160 4480×2450×39 06 16.9
PCL-1250 40 2×132 950/1200 100-200 4520×2640×3100 22
PCL-1350 60 2×2 20 800/1200 160-360 5300×2900×3200 26
Note: This specification is just for reference, any changes are subject to the products.