Specification :

Detail: Roof Tile Roll Forming Machine

Working Flow
Decoiling--> Sheet Guiding--> Coil Strip Leveling--> Roll Forming--> Cutting to length--> Output Table

Component and Function
1. Manual/ Hydraulic Decoiler

2. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement.

3. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets

4. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool.

5. Cutting Unit: Hydraulic cutting, cut-to-length according to customer' s requirement.

6. Output Table

7. PLC Control System
Model Number: custom made
Brand Name: HS
Payment Terms: T/ T
Minimum: 1 set
Certification:
Delivery Time: about 50 days after receipt down payment
Supply Ablity: 10 Set/ Sets per Month lines