Silicone RTV Mold-Making System

Price:

USD 6.8~9.5 / Kilogram

Quantity Order:

Origin:

China

Pack. & Delivery:

25kg/drum or 200kg/drum

Definition of Silicone RTV Mold-Making System:
Silicone RTV Mold-Making System is a complete mold making system that can be used to make virtually any type of mold. Silicone RTV is a two component, tin catalyzed, room temperature cured silicone rubber. It is designed as a 25 Shore A mold rubber ? C meaning it is flexible, good dimensional stability, and good elongation and tear strength. It has very low shrinkage, excellent long-term retention of rubber properties and accurate detail reproduction. It is excellent for casting cement, vinyl, wax, plaster, low-melt metals, urethane resins, epoxy resins and polyester resins. It is a safe product to use when directions are followed fully. TAP Silicone has a 4-8 hour demold time allowing two part molds to be completed in one day.

( Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)

During operate of Silicone RTV Mold-Making System :
1. weigh theliquid silicone rubber and curing agent exatly .
2. Stir theliquid silcone rubber and curing agent evenly .
3.we should choose the right hardness to making diffirent size of product mold.

Whatever you have any further information required or suggestion, pls feel free to contact

Thank you for your attention.

Helen

Tel: + 86-755-89948019
Fax: + 86-755-89948030

MSN: Helenliao888( at) hotmail( dot) com
skype: helenliao888
Yahoo: helenliao888( at) yahoo( dot) com

Recommend to your friends