Specification :

Professional Hair Rollers

THEO HAIR ROLLERS
1.Speed & Ease
2.Lightweight
3.Flexible & Control
4.Eco-friendly

Using revolutionary technology, our rollers heat up in less than four seconds, and thanks to the unique induction heating system, they heat from the core, so they’ re hot in the hair, not in the hand. As they’ re soft grip, pins aren’ t essential, and with several sizes available, you can create everything from subtle natural curls to styles full of volume, bounce and body

TheO will transform the way you style your hair forever. From the choice of soft-grip roller size, to the unique induction heat technology that takes them from cold to 130° C in less than four seconds , it gives you the freedom to create gorgeous looks that are full of body, volume and movement.

HOW TO USE TheO Pod : 1. Turn the power switch ON at the back of the pod.
2. The power light will glow blue.
3. In order to heat up one of our unique rollers, simply place your chosen roller size into the heater pod. You do this by carefully sliding the roller, flat side down, into the pod base.
4. REMEMBER, you can only put in one roller at a time, and never use any other make than TheO .
5. When you put a roller into the pod, you’ ll hear a single beep.
6. Whilst the roller is heating, the Ready LED will flash green and beep three times. The roller will reach the full working temperature of 130° in less than four seconds.
7. When the heating process is complete, you’ ll hear another beep.
8. The Ready LED will glow a permanent green.
9. The roller will be cool on the outside, so you can handle it easily.
10. As soon as you remove the heated roller, the Ready LED will turn itself off.
11. When you require another roller, simply repeat the process until you’ ve completed your styling.
12. Once finished, turn the power switch OFF at the back of the pod and remove from the mains source.

HOW TO USE TheO Hair Rollers : Step 1: Starting from your front hairline, take a section of your hair between your first two fingers, ensuring it matches the width of the desired roller.
Step 2: For beautiful long-lasting results, lightly mist the TheO Amplify Spray over the section of hair.
Step 3: Insert the chosen roller at the base of the hair you have gathered. Now, whilst moving upwards, comb it through the length of the section. Once it reaches the tip of the section, secure the hair with your fingers, and roll downward toward the scalp, ensuring the hair is tightly wound into place.
Step 4: When you reach the scalp, make sure the roller sits vertically-this is important as the next roller will sit directly behind it.
Step 5: Take the section of hair that lies immediately behind the first roller, and follow the same techniques in Steps 1 and 2 . When you reach the scalp, The second roller should sit flush behind the first-follow this technique until you’ ve covered the areas where you want to add curl or body.
Step 6: It' s important that you allow the rollers to cool down in the hair before removing. To take them out simply reverse Step 2, slowly unwinding your hair.
Step 7: Finally, using your fingers or a soft brush, style your hair as desired. Gorgeous !