Specification :

With qualified products and good service, SHIBO supplies series Raymond Roller Mill( Raymond Mill) , which is suitable for grinding barite, calcite, potash feldspar, talcum, marble, limestone, ceramics, etc.
Structure of Raymond Mill:
1. The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system.
2. Compared with other milling plants, its passing ratio achieves 99% , this is what other mill can not reach.
3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.
4. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant.
5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.
Working Principle:
Firstly, raw material is crushed by jaw crusher to the size required, then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder, evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind.
After this, the ground stuff are carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set’ s airflow system is closely sealed up and circulated under condition of negative and positive pressure.
Technical Data:
Model 3R2115 3R2615 3R2715 3R3016 4R3216
Roller Number 3 3 3 3 4
Diameter ( mm) 210 260 270 300 320
Height ( mm) 150 150 150 160 160
Ring Inside diameter ( mm) 630 780 830 880 970
Height ( mm) 150 150 150 160 160
Maximum feed size ( mm) 15 15-20 15-20 15-20 20-25
Output size ( mm) 0.044-0.165 0.044-0.165 0.044-0.165 0.044-0.165 0.044-0.165
Power of main frame ( kW) 15 18.5 22 30 37
Fineness of final product ( mm) 0.165 capacity ( t/ h) 1.2-1.8 1.8-2.5 2.3-2.8 2.6-3.2 3.2-4.5
0.075 0.6-1.2 1.2-1.8 1.8-2.3 1.9-2.6 2.4-3.1
0.044 0.6-1.0 0.8-1.2 0.9-1.7 1-1.9 1.8-2.5

Note: We hold the ringts to modify the design and specification of our products, any modification shall not be advised additionally.