Specification :
1033 LED SPOT Light is an innovatory product which researched
by ourself with our years of experience in designing stage lighting and LED light. Replacing traditional light bulb with intensive brightness LED, and adopt the special mere design of way to concentrate on mixing LED light, avoid any missing of light, the mere
utilization ratio is more than 95%.
The bold mentality of designing, make 1033 LED spotlight turn
into an exquisite "work of art " that is so fond to let out of one's hand. Using plastic (ABS) as the outer covering, the special stripe processing of surface makes her have the metal sense of reality.The designer of hanging bracket is exaggeration but reasonable, the adjustable angle of lamp holder is: 350 degrees, suitable for different occasions.
LED light does not have ultraviolet ray. So, can bring the heat of the
light itself down to low enough, and avoid the illumination but make the
object fade. 1033 LED spotlight is suitable for numerous occasions.
Such as: buildings, supermarkets, stage, nightclubs, the exclusive
agency, fashion show, art museum, etc.1033 LED spotlight designed to compact, have the advantages
that apt to install, save the electricity, longer-lived (60,000-100,000
hours) and so on. Utilize red, green, blue LED light as the light source;
adjust luminance systematically through the electron, from one kind of
color slowly changing to another kind of color.Utilizing sealed mere design of ray to avoid any influence to light
effect as the result of dust entering.
LED
Intensive brightness LEDs
18W RGB LEDs
60-100 thousand hrs Rated Life
Beam angle
17 degree
Dimmer,Strobe
Electronic dimmer for light output adjustment
from 0 to 100% (No colour variation)
High speed white or full colour strobe,flash rate 1-13fps
Packing
Height:416mm (16.4")
Width:191mm (7.52")
Depth:126mm (4.96")
Weight:3Kg (6.6 lbs)
Thermal
Maximum ambient temperature:40
Maximum housing temperature:60
Working mode
Protocol: USITT DMX-512
Control channels: 5CH
Control options: DMX,Auto-trigger
Operation modes: Master/Slave,Stand alone,Sound
LED Control panel:Fixture addressing & parameter settings
Manual control of all DMX channels: via LED control panel
Data in/out: Locking 3-pin XLR
Electrical
Input voltage: 90-250V AC,47-63Hz
Fuse: T 1A
Max. Power Consumption: 20VA
COLORS
16,7million colours (24 bit)
The LEDs used are a mixture of red,green,
and blue to produce,via RGB electronic mixing.
White balance pre-programmed via LED control panel