Specification :

Digital Shore Durometer has three model A, C, D as below:

1. Digital Shore A Durometer is suitable for testing hardness of low and middle hardness such as plastic, leather, rubber, wax and so on.

2. Digital Shore C Durometer is widely used to measure hardness of rubber microporous materials with compression ratio of 50% with above 0.5kg/ c¡ stress which is made of foam. And it is suitable for testing similar materials as needed. It complys with HG/ T2489.

3. Digital Shore D Durometer is used to test hard rubber, hard colophony, grass, plastic, print board, fibre and so on. It complys with DIN 53505, ASTM D2240, ISO/ R868, JIS R7215.executive standart - GB/ T531-99, GB2411-80, HG/ T2489-93, JJG304-2003.

This series Shore Durometer is more advantage than Dial Shore Durometer.

Specification:

Scale value: 0-100

Strock: 0-2.5mm

Tip pressure force: 0.55N-8.06N( Shore A/ C) , 0-44.5N( Shore D)