Specification
HOTPLATE & STIRRER
Analog Stirring Hot Plates
Made in TORREY PINES SCIENTIFIC MODEL - USA.
Model : HS10-2
Heat, stir, or heat and stir on a rugged, quick heating, flat, white, solid ceramic heater surface.
Heat to 450° C on plate surface in minutes
Stir from 100 to 1500 rpm
Plate size on the HS10, HP10 and ST10 is: 20.32cm x 20.32cm
Plate size on the HS1, HP1 and ST1 is 15.24cm x 15.24cm
Plate size on HS11, HP11
and ST11 is 30.48cm x 30.48cm
Solid ceramic heater surface for excellent chemical resistance
Milled-flat cast aluminum tops for even heating in 6" x 6" and 12" x 12" models
Heater plate mounted in cast aluminum frame that remains cool for safety
Efficient 600-watt heaters on the HS10 and HP10
Efficient 400-watt heaters on the HS1 and HP1
Powerful 1400 watt heaters on ceramic-topped HS11 and HP11 and 1200 watt heaters on HS11A and HP11A
Fused for safety
UL, CSA, and CE certified
Each Torrey Pines Scientific hot plate is made with a cast aluminim chassis that is painted with chemically resistant epoxy paint.
The chassis is designed to keep spills out of the case.
Heating and stirring controls are solid state with individual indicator lights which illuminate when either is activated.
The controls are well forward of the heater surface to prevent accidental burns.
Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. .
The stirrer features a solid state control capable of stirring an aqueous solution from 100 to 1500 rpm.
The control has an OFF position fully counter-clockwise, and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on.
The magnet is a circular disc with twenty pound pull strength and is capable of stirring more than two liters of aqueous solution.
The heater control has OFF, LO, and HIGH positions for quick setting, and a smooth infinite control of about 270 degrees between LO and HIGH settings.
The control will regulate a set point to ± 2.5° C.
Control knobs are specially selected to provide easy use and positive, tactile feel. All units are fused, and have a 3-foot long detachable AC line cord with a male plug that matches the local standard.
Product Specification:
Hot Plate:
Solid ceramic
Maximum temperature of the plate surface Aluminum: 400° C
Ceramic: 450° C
Time to maximum temperature, unloaded Aluminum: 10 minutes
Ceramic: 3 minutes
Temperature control Aluminum: + / -2.5° C
Ceramic: = / -2.5° C
Heater power, watts HS1 & HP1: 400 watts
HS10 & HP10: 600 watts
HS11 & HP11, Aluminum: 1200 watts
HS11 & HP11, Ceramic: 1400 watts
Stirrer:
Speed range unloaded
100 to 1500 rpm
Maximum load, aqueous HS1, ST1, HS10, ST10: over 2 liters
HS11 and ST11: over 10 liters
Magnet strength 20 pounds
Weight capacity on heater surface Over 50 pounds ( 22.5 kilos)
Electrical:
Operating voltages : 220VAC/ 60HZ, and 230VAC/ 50Hz
Power consumption HS10 and HP10: 650 watts
HS1 and HP1: 450 watts
ST10 and ST1: 100 watts
HS11 & HP11: 1450 watts
HS11A & HP11A: 1250 watts
ST11: 100 watts
Current Draw
220/ 230VAC Models:
HP1 & HS1: 1.9 amps
HP10 & HS10: 3.25 amps
HP11 & HS11: 6.0 amps
HP11A & HS11A: 5.2 amps
Additional Information:
Unit size HS10, HP10 and ST10: 33cm deep by 22.9cm wide by 8.9cm tall
HS1, HP1 and ST1: 25.4cm deep by 17.78cm wide by 11.43cm tall
PT. SUMBER UTAMA KIMIA MURNI
Ruko Klampis Square C-29
Surabaya 60117
TLP : 031-5914004
