The main purpose: Manual Thermoplastic Marking Machine is the chief equipment in the thermoplastic marking operation, always equipped with Thermoplastic Pre-heater . It can used....

Apply paint type: water-based marking paint, two-component making paint, cold paint

Technical parameters: Maximum nozzle size: single-shot .046; double-shot 0.033 Maximum....

Technical parameters: Maximum working pressure: 210 kg / ccm Work flow: 11.4 liters / min ( hydraulic piston pump) Engine: 9.0 hp gasoline engine ( Honda) Work efficiency: 12-16....

Technical parameters: Maximum nozzle size: Single-shot .046
Double-shot 0.033 Maximum working pressure: 3300PSI Work flow: 7.5 liters / min ( hydraulic piston pump) Fuel tank....

Technical parameters:
1.Power: 5.5HP Honda gasoline( imported) 2. Wind Wheels: Turbo Wind Wheel 3. Handle: Lift type Adjuster 4. Wind power: you can adjust the size of wind....

Maximum wind flow: ( m3/ min) : 15 Maximum wind speed ( m / sec) : 71
Engine Displacement ( cc) : 53.8 Ignition method: Electronic Ignition Starter: recoil Fuel tank capacity ( ....

Technical parameters:
1. Engine: The 37HP water-cooled electric startup diesel engine with four cylinder in-line, low noise and environmental protection .With water temperature, ....

Main technical parameters:
Engine: Honda 5.5HP 4 stroke cold oil engine
Air Pump: 0.2sq.m/ min flow
Pressure: 0.6MPa rated pressure, the maximum pressure is 0.8MPa.
There is....

Technical parameters:
Engine: 10.58HP America Pericom oil engine
Snapping effect adjustable : Strong , Middle , Feebleness , Nonpolar adjust
Snapping depth: 4mm of asphalt....

Main technical parameters:
Engine: 20PS electrical starting water cold diesel oil engine
The drive mode: The diesel oil engine bring along the beater by the gear pump, double....

Main technical parameters:
Engine: 20PS electrical starting water cold diesel oil engine
The drive mode: The diesel oil engine bring along the beater by the gear pump, double....

Four-wheel-cylinder Double-cylinder thermoplastic kettle is a kind of trailer walking-style facilities for melting material . The machine equipped with pneumatic ( or hydraulic) ....

Thermoplastic Road marking paint is made of oil colophony, EVA , PE cere , paint and others material. In the normal temperature, it is present powder .In the construction, heated....

Technical parameters:
Engine : Honda 13HP electric starting 4 stroke cold oil engine
Rated pressure of plunger pump: 16MPa
Maximum flow: 15-30L/ min
Painting width: 100-450mm....

Technical parameters:
Engine : Honda 6.5HP4 stroke cold oil engine
Working pressure: 10-15MPa
Maximum flow: 8.5L/ min
Painting width: 100-450mm( Adjustable)
Painting....

Technical parameters:
Engine: Honda OHV4-stroke cooled gasoline engine
Drive System: Automatic hydraulic stepless transmission system
Making speed : 0-4km / h
Climbing Degree....

Technical parameters:
Engine: Honda OHV4stroke cold oil engine.
Drive system: Automatic oil hydraulic nonpolar shift system
Rated power: 6.5HP
Marking speed: 0-4km/ h
Grade....

Technical parameters:
Engine: Honda OHV4-stroke cooled gasoline engine
Drive System: Automatic Hydraulic Continuously Variable Transmission system
Making speed: 0-4km / h
....

Technical parameters:
Marking width : 400mm- 450mm
Painting thickness : 1.8-4.0mm( Adjustable)
Heating method : Petrolia liquefied gas
Dimension : 1300mm* 800mm* 1000mm
....

Technical parameters: Climbing Degree: 15 degree Heating method: liquefied petroleum gas Paint Capacity: 100kg ( 50L) Glass beads Capacity: 15kg Marking Width: 100mm/ 150mm/ 200mm....