Specification :

1. Application of the line
The line mainly is used to produce the distribution cable which has the cores 2~ 12 fibers.
2. Main technical specifications:
2.1 Diameter of tight optic fiber ¦ 0.9mm
2.2 Diameter of premise cable ¦ 12mm ( 12 cores)

2.5 Tight fiber pay-off tension 0.6N~ 3N ( adjustable)
2.6 Stranding angle 0~ ± 4À
2.7 Stranding Pitch 80~ 400mm
2.8 Aramid cops no. 12 cops
2.9 Aramid pay-off tension 0.6N~ 3N
2.10 Extruder type SJ65 × 25
2.11 Take-up tension 5N~ 20N ( adjustable)
2.12 Size of take-up reel PN1000mm
2.13 Line length approximately 36 m
2.14 Power requirement 55Kw
2.15 Line operation direction appointed by consumer
2.16 Line color appointed by consumer
2.17 Line center height 1000mm
2.18 Overall dimension

3 Line configuration
3.1 FRP cores pay-off frame 1
2.2 12 tight fibers pay-off units 1
3.3 SZ stranding unit 1
3.4 Aramid driven pay-off device 10 sets
3.5 SJ65 extruder 1
3.6 Hot water trough 4m
3.7 Hot water tank 1
3.8 Cooling trough 12m
3.9 Blow dryer 1
3.10 Diameter control system 1
3.11 ¦ 630 Double wheel capstan 1
3.12 Accumulator type tension control 1
3.13 ¦ 1000 take-up 1