Specification :

Explorer 60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer 60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 50 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer 60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame.

Explorer 60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.

TECHNICAL CHARACTERISTIC

STEAL PIPE DIAMETER | DRILLING DIAMETER | DEPTH
AW | 56 - 66 mm | 750 m
BW | 66 - 74 mm | 500 m
NW | 74 - 86 mm | 400 m
AQ | 48 mm | 800 m
BQ | 60 mm | 600 m
NQ | 75, 8 mm | 450 m

The capacities may differ according to ground parameters, drilling angle and drilling equipment. These values are only serve as a guideline in downward drilling in an homogeneous rock.

FEED FRAME 1 | 2 | 3
Feed Length 850 mm | 1800 mm | 3300 mm
Feeding and Pulling Force: 64 kN
Feed Speed;
Low: 0.5 m/ s
Fast: 1.0 m/ s

ROTATION UNIT
Spindle Speed Range: 50-1000 rpm
Maximum Torque: 1366 Nm

ROD HOLDER
Maximum Rod Size: 114 mm
Holding Force: 22 kN

POWER UNIT
Electrical | Diesel
Engine 70 kw | 97.2 hp

MAIN PUMP
Flow: 75 lt/ min | 75 lt/ min
Pressure: 260 bar | 260 bar

SERVICE PUMP
Flow: 29 lt/ min | 29 lt/ min
Pressure: 210 bar | 210 bar

The manufacturer has right to make modification without any notice.

OPTIONAL ACCESSORIES
Wireline Host: 1000 m | 300 m
Cat Head
Water Pump: 70 lt/ min | 140 lt/ min