Specification :

The FZM- air type bus bar rabbet air type bus bar rabbet design feature air type bus bar rabbet design has used the advanced single bolt clamp post. For bus bar rabbet unit connection part, because it constructs specially. May prevent installs when the misoperation, so long as simultaneously tightens a bolt. Could design rapidly reliably, two bus bar rabbet unit connection high protection rank jack bus bar rabbet in the jack place the safety protection back plate, only then, when the apron pulled open. The peg grafting box can insert. The jack usually does not use may pull the guard plate shuts and the leading blockade dies. Has prevented in the receptacle place dust and foreign matter entry. Thus enhances the bus bar rabbet the barrier property. Prevents the misoperation, enabled the bus bar the security to obtain enhanced the outer covering (protecting crust) the level number bus bar rabbet to design 5 electric current ranks enormously. Has only used 3 level outer coverings, when like this system according to adjacent rank transformation capacity the bus bar rabbet does not need to replace the outer covering. If 400A changes 630A, the outer covering size is the same. Facilitated the installment transmission electrical energy to be big greatly firmly. The bus bar rabbet design to separate the air insulation type, improved the bus bar rabbet radiation, reduces the impedance. Achieved the bus bar rabbet best economical electric transmission complete set to be good. The bus bar rabbet has designed each kind of function connection element. May meet all distribution project needs. This factory also produces each kind of bus bar rabbet, is suitable for each kind of place electric power feeds and the power distribution use and so on exhibition hall, guesthouse, bank, entertainment. Has safely reliable, the easy installation, the construction is flexible, volume low-power big, the design construction cycle is short, service life long and so on characteristics.