Specification :

Features
Core to core alignment by PAS technology ( PAS:Profile Alignment System)
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface
Applicable fibers
SM MM DS NZDS

Fiber cleaved length
8-16mm (Coating diameter:250¦Ìm)

Fiber diameter
Cladding diameter:80-150¦Ìm Coating diameter:100-1000¦Ìm

Fiber Count
Single

Splicing mode
Auto Calibrate Normal Special

Fiber aligning method
Core aligning ¡¢clad aligning¡¢manual aligning

Image processing method
Digital

Actual average splice loss
0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS)

Typical splicing time
9 sec (standard SM fiber)

Splicing mode
53(templet), 40(user)

Splice loss estimate
More accurate

Return loss
£¾60dB

Storage of splice result
4000 results, 20 parameter per result

Fiber magnification
300X (X or Y view) 150X (X and Y view)

Tube typical heating time
30 sec

Tube heating mode
9(templet),24(user)

Tube heating temperature
Adjustable

Applicable protection sleeve length
60mm,40mm and a series of micro sleeves

Tension test
2N

Electrode life
2500

No. of splice/heating with battery
Typical 160 cycles (splice/tube heat with inner Li-battery)

Display screen
5.6 inch TFT color LCD monitor

Image change over
The fiber image can be turned upside down

Terminal
USB 1.1 and VGA

Operating condition
0-5000m above sea level,0-95%RH and -10-50¡ãrespectively, Max wind velocity of 15m/s

Power supply
AC 100-240V with AC adapter inner Li-battery (6600mAH)

Dimension
150mm(L)¡�150mm(W)¡�150mm(H)

Weight
2.7Kg excluding battery, 3.2Kg including battery