Specification :

Electromagnetic Flow Measuring System
Flow rate measurement of liquids with solids content or inhomogeneous liquids
Electromagnetic flowmeter for bidirectional measurement of liquids with a minimum conductivity of e5 ¼ S/ cm - in particular fluids with solids, and fluids which are abrasive, inhomogeneous or tend to build-up, for example:
* Chemical/ mechanical pulps, paper pulp or wood pulp with solids contents up to 15 Vol.-%
* Fruit mashes, fruit concentrates and final products ( salad dressings, soups with vegetable pieces)
* Slurries containing high amounts of sand or stone with an abrasive effect, e.g. ore slurry or mortar
* Chemically inhomogeneous fluids ( e.g. additives)
* Thick wastewater sludges
* Flow measurement up to 9600 m³ / h ( 42 267 gal/ min)
* Can be used up to + 180 ° C ( + 356 ° F) and max. 40 bar ( 580 psi)
* Fitting lengths as per DVGW/ ISO

Application-specific linings and electrodes:
* Natural rubber, hard rubber, polyurethane, PTFE or PFA linings
* Flat, bullet nose, neck, bow or brush electrodes

Connection to process control system:
* HART, PROFIBUS DP/ PA, FOUNDATION Fieldbus

Your benefits :
Promag measuring devices offer you cost-effective flow measurement with a high degree of accuracy for a wide range of process conditions.