Specification :

Description:

This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:

--Volkswagen

--Skoda

--Audi

--Seat

Reference Data

1.This cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.

2.Terminal Bus of communication

3.Terminal L= Ignition for waking up car computing system (ECU: Engine Control Unit)

4.Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW

5.This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only

6.Supported also ISO9141 protocol

7.The cables may work with some versions of the Carsoft, but carsoft used a lot of different intercaces during the different versions and also had some custom interfaces.

8. Product running as virtual comport, like many products it usees a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

9. Read & erase error code, log data e. g. speed, gasoline, consume engine-rotating(RPM: Rotation Per Minutes).

Packaged insided:

1 x VAG COM 409.1 Cable
1 x Driver CD