Specification :

The ENW32 is a 100Mbps, 32-bit Peripheral Component Interconnect ( PCI) Local Bus Fiber Optic Fast Ethernet adapter designed to address high-performance system application requirements. The bus-mastering architecture provides high data throughput for power users. ENW32 supports 100Mbps data rates with Multi-Mode Fiber Optic cable. The LED is also provided for quick monitoring of busy status.

The ENW32 can be operated in Full-Duplex mode to double the total data transfer rate to 200Mbps. ACPI ( Advanced Configuration & Power Interface) makes the ENW32 more flexible in more sophisticated operating systems such as Windows 98 and above. The ENW32 is a highly cost-effective solution and the best choice for your desktop 100Mbps Fiber Optic network upgrade.

Features

Plug and Play installation

Complies with the IEEE 802.3u 100Base-FX / IEEE 802.3ah 100Base-LX10 / -BX10 Ethernet standard.

Standard optical fiber connector and cable type options

Full duplex or half-duplex operation

PCI Bus Master direct memory access for high throughput and low CPU utilization

IEEE 802.3x Flow Control enabled with full duplex operation, allowing enhanced operation when directly connected to a switch.

IEEE 802.1Q/ VLAN Tagging supported

VLAN registration using IEEE802.1Q GVRP standard

IEEE 802.1p Tagging supported

IP Multicast packet filtering reduces CPU utilization and conserves network bandwidth.

Large 2Kb Tx, 2Kb Rx FIFO buffers synchronize transmissions and buffer data to help prevent packet loss.

Two LED indicators: Link/ RxAct, Power/ TxAct

Drivers for all leading Network Operating Systems

Software Drivers

Microsoft Windows 95, 98, 98 SE

Microsoft Windows 2000

Microsoft Windows XP

Microsoft NT 3.51 / 4.0

Microsoft Windows for Workgroups 3.11

Microsoft Windows CE.NET 4.0 / 4.2

Microsoft Client for DOS

NDIS 2 driver

NDIS 3 driver

NDIS 4 driver

NDIS 5 driver

Novell NetWare Client for DOS

Novell NetWare Client 32 for DOS

Novell NetWare Server 3.12, 3.2, 4.11, 4.2, 5.0, 5.1

ODI for DOS driver

32 bit ODI LAN driver

Specifications

Optical Interface: Optical Ethernet 100Base-FX

Single single-mode fiber, single wavelength 1310nm, single SC/ PC connector, 15 km reach

Single single-mode fiber, dual wavelength 1310 / 1550nm, single SC/ PC connector, 40 km reach

Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC/ PC connectors, 60 km reach

Dual multimode fiber, single wavelength: 1310nm, dual SC/ PC connectors, 2 km reach

Host interface: PCI 2.1 Bus ( Bus Master)

Physical Dimensions: 12.0 cm x 5.3 cm

Environment:

Storage: -25oC~ 85oC ( -13oF~ 131oF)

Operating: 0oC~ 50oC ( 32oF~ 122oF)

Humidity: 10% to 90% non-condensing

Power Consumption: 2 Watts max.