Specification :

Features:
1. Support GSM/ CDMA, remotely control the alarm unit to arm/ disarm/ listen-in/ photo-taking by SMS.
2. Support the motion detection function which Can capture thief ‘ s photo and send to owner’ s cell phone or email box, or stored into the SD card for evidence.
3. The picture to be transmitted adjustable: QCIF ( 160x128) , CIF ( 320x240) , VGA ( 640x480) .
4. Can pre-set 5 groups of alarm Phone Numbers.
5. Listen-in function: Can clearly hear the voice, footstep, and so on.
6. With password input, can arm/ disarm/ listen-in/ photo-taking the alarm system by remote controllers and SMS.
7. Can control home appliances remotely through the relay output.
8. Control panel has two input ports, which can connect with wired devices ( normally open) .
9. Siren port for shift between silence and siren.
10. Can work with wireless detectors or sensors like PIR Sensors, beams, gas/ smoke detectors, panic buttons and so on.
11. All the alarm system with wireless signal transmission, no need to connect to wire and easy for installation.
12. Especially suitable for storeroom, garage and the places where have no telephone line.
Technical parameters:
Stand-to current: 50mA.
Working volt. : 9V-12V
Support GSM900, 1800, and 1900MHz., three working modes.
Support PHASE 2/ 2 agreement ( including data business)
Sending power: Class10 ( 2 w) / EGSM900 and CLASS 1( 1W) / GSM1800
Receiving code: ASK
Receiving frequency: 315 and 433Mhz.
Remote distance: 100 meters.
Standard pack components:
1 main panel, 2 remote controllers, 1 wireless door sensor, 1 wireless PIR detector, 1 siren, 1 camera, 1 GSM antenna, 1 power supply, 1 manual