Specification :

Snow Plough for Airport YHQCX-A3.0:
Snow Plough for airport is specially used for cleaning snow in airport, the snow plow is fitted with soft cutting edge to protect the airport floor from damage.

Snow Plough for Airport YHQCX-A3.0 Features:
1. The Snow Plough features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2. The independent hydraulic drive system can work only required to hookup the automobile battery.
3. The operation can be done in the cab, safe and reliable.
4. The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure— in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5. In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6. The installation and removal of the snow blade is convenient and quick.
7. With a lighting system independent of the vehicle body, the snow blade is convenient for snow removal operation at nights.
8. Reasonably structured, the snow plow can push snow to one side and function as throwing snow; in the process of clearing snow, the snowshed mounted on the snow plow can prevent the snow from crossing the blade, eliminating the possibility that the snow? Could sprinkle onto the windshield of the vehicle to affect driver' s sight.
9. The snow plow is fitted with soft cutting edge to protect the floor from damage.

Snow Plough for Airport YHQCX-A3.0 Technical Parameters:
Model YHQCX-A3.0
Dimension 3000* 1150* 1600mm
Width 3.0m( Adjustabl e)
Weight 960 kg
Cleaning Width e 2.63m
Max turning Angle 30
Slope angle ± 5o
Operating speed e 30 km/ h
Avoidance height 200mm
Blade Avoidance way Blade spring avoidance
Applicability 5--8 ton truck 8--15 ton truck