Specification :
Brief Introduction
MODELE is mortar additive for plastering construction with good workability. It has performances of enhancing cohesive strength and water retention, so it solves the problems of low-workability in construction, low cohesive strength, and low water retention, crack-hollow and cracks of mortar if using the traditional additive.
Usage Range:
It can be used in all kinds of plastering mortar in civil construction projects, industrial construction projects, road construction projects and bridge construction projects, pool construction projects, and culvert construction projects.
Features
High cohesive strength, small shrinkage, non- crack-hollows and non-cracks.
High water retention, no secreting, convenient to use in construction projects.
Usage
1. Mixing procedure while using vertical mixers, horizontal mixers: Firstly, mix part sand, agent and water and stir them uniformly. Put cement and all sand into them. At last, stir the mixture for 3~ 5 minutes.
2. Mixing procedure while using drum-type mixers: Put agent, cement, and sand together, stir them for 1 minute. And then add water to the mixtures and stir for 3~ 5minutes.
3. Artificial mixing: the agent should be first dissolved into the water then placed into mortar.
4. The first mixing mortar, the quantity of agent should be increased 1 time.
5 The water in the mortar with the agent should be reduced by 20% .
6 The mixture ratio of agent fluctuates with different cement and sand. So the reasonable ratio should be depended on the materials at the site and trial.
Reference Mixture Ratio:
There are general type and anti-cracking, anti-seepage type of the agent, 25kg/ bag for each type. And there is a measurement spoon in every pack. The mixture ratio of agent to cement is respectively 0.5% -0.75% and 0.2% --0.3% .