drip irrigation pipe

Quantity Order:

Technical parameters
1.diameter 16mm
working pressure 0.1Mpa
thickness 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm
flow rate 1-4L/ h
space between dripper set according to customers requirement
2.diameter 12mm
working pressure 0.1Mpa
thickness 0.6mm, 0.7mm, 0.8mm
flow rate 1.5-3L/ h
space between dripper set according to customers requirement
features
Dripping homogeneous dripper is made by imported mold and raw materials, the design of flow path is reasonable which ensures the steady flow rate and long paving length .
Dropper is not easy to plug due to wide flow path of dripepr, the small grain in the dripper can be push out quickly thus increasing the anti-clogging function.
long service life the reasonable ratio of raw materials and ageing resistant thus increase the service life
Emitter bonding closely with the wall: the dripper is inserted in the pipe, the outside of pipe is smooth thus dripper will not be destroyed or take off during moving and paving
Emitter spacing arbitrarily set according to user needs
use:
Our products are widely used in greenhouses, fruit trees, cotton, tobacco, tea and urban landscape irrigation and other fields

Recommend to your friends