Specification :

CPE Unit Includes:
• 1 CPE Modem unit.
• 1 Microwave Transceiver with mounting hardware.
• 1 Installation and Configuration Manual.
CPE Antenna Option:
• Omni Antenna 9dBi
• Panel Antenna 11, 16dBi
• Reflector Antenna 19, 21 & 24dBi
CPE 4Mbps Specification:
• Frequency: 2400-2486 MHz
• Frequency Step: 6 MHz
• Power Control: e20dB
• Capacity: 4Mbps
• Max Throughput: 3.9Mbps
• CPE Network Interface: 10BaseT
o Optional: Data 1E1, 1T1
• Power Supply: 110/220 VAC
• Power Consumption: 17 Watt
• Ventilation: Not Applicable
• Dimensions: 200x140x57mm for the CPE, 165x165x40 mm for the
Transceiver.
• Antenna Interface: N Connector 50ohm Female
• Alarming: Transceiver not responding, WAN Packets Loss
• Output Power: +21dBm guaranteed
• Receiver Sensitivity: -68dBm @ full speed
• Environmental: -10 C to + 50°C for the CPE Modem Unit. -33°C to +60°
/95% humidity for the Transceiver.
Point to Point Specification 8Mbps
• Frequency: 2400-2486 MHz Band
• Frequency Step: 6 MHz
• Power Control: e20dB
• Capacity: 4Mbps
• Max Throughput: 3.9Mbps
• Network Interface: 10BaseT, Data 1E1, 1T1
• Power Supply: 110/220 VAC
• Power Consumption: 17 Watt
• Dimensions: 208x140x57 mm for the Modem Unit; 165x165x40 mm for
the Transceiver
• Antenna Interface: N Connector 50ohm Female
• Alarming: Transceiver not responding & WAN Packets Loss
• Output Power: +21dBm guaranteed
• Receiver Sensitivity: -68dBm @ full speed
• Environmental: -33°C to +60°/ 95% humidity for the Transceiver.