BW Gas Alert Micro Clip Multi-Gas Monitor
Features & Applications:

This rugged, ultra-compact and lightweight BW Gas Alert Micro Clip Multi-Gas Monitor has multiple alarm levels include: instant low and high alarm for all gases, TWA ( time weighted average) and STEL ( short term exposure limit) for H2S, CO and OL ( over limit) alarm.

Rugged, ultra compact and lightweight monitors contain easy-to-use one-button operation/ calibration and integral concussion proof for demanding environments. Datalog up to 16 hours and 10 events. Continuous LCD shows simultaneous gas concentrations. Powereded by a lithium polymer battery with approximate 12-hour run time -- recharge in less then three hours. Alarms include: 100dB typical alarm tone, bright wide-angled alarm bars and an integral, vibrating alarm for high-noise areas/ Feature full-function self-test of sensor, battery, circuitry and audible/ visual/ vibration alarm.

Includes stainless steel alligator clip, battery/ charger, calibration cap/ hose, instructions and interactive training CD.

Features:

Rugged, ultra-compact ( 4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight ( 5.6 oz. / 160 g)
Simple one-button operation
Standard datalogger ( 16 hours) and eventlogger ( 10 events)
Durable, stainless steel alligator clip
Integral concussion-proof boot for the most rugged environments
Continuous LCD shows simultaneous gas concentrations for CO, O2, and combustibles ( 0-100% LEL or 0-5.0% Methane)
Powered by a lithium polymer battery ( run-time typically 14 hours; recharge in less than 3 hours)
Provides 95 dB alarm tone and bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Backlight: in alarm ( auto) and on demand reactivation
Four alarm levels: Instant Low and High Alarm for all gases; TWA ( time weighted average) and STEL ( short term exposure limit) for CO; OL ( over limit alarm)
Simple automatic calibration procedure
Fully compatible with BW' s MicroDock II automatic test and calibration system
Records TWA, STEL and maximum exposures to gas and displays readings on command
User selectable options include: confidence beep, latching alarm, calibration due date, bump due date, " SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection ( 0-100% LEL or 0-5.0% v/ v methane) and stealth mode
Full function self-test of: sensor, battery, circuitry and audible/ visual/ vibration alarms
Delivered ready for use with sensors, lithium polymer battery, stainless steel alligator belt clip, calibration hose/ cap and instructions

Spec Summary:
DETECTOR: 3-gas detector
Auto zero: Yes
Calibration: Automatic
Backlight: Alarm condition ( auto) and reactivation on demand
Sensor: Plug-in, electrochemical cell ( toxic and oxygen) ; plug-in, catalytic bead ( LEL)
User options: Adjustable STEL period ( 5 to 15 minutes in 1 minute intervals) ; set calibration span
levels and due date; toggle ON/ OFF; oxygen auto-calibration at start-up;
auto-zero LEL and CO on start-up; latching alarms; “ SAFE� display function
( does not display gas concentrations unless detector goes into alarm) ;
stealth mode for silent operations; force calibration when calibration overdue;
calibration lockout ( calibration must be invoked via IR) ; force bump test; bump test
reminder; multi-language LCD selection in English, French, German, Portuguese
and Spanish; 0-100% LEL ( Lower Explosive Limit) or Methane gas 0-5.0% v/ v
selectable measurement; alarm setpoint disable ( set to zero for off) ; calibration due
date ( 1 to 365 days, or set to zero for off) ; confidence beep ( every 10 seconds
when enabled) ; individual sensor enable/ disable
ALARM INDICATORS: Clearly advises alarm levels with visual, audible and vibrating alarms
Visual alarms: Wide-angled flashing LED alarm bars
LCD indicates gas present and alarm levels encountered
Audible alarm: 95+ dB variable pulsed audible alarm at 11.81 in. / 30 cm ( 100 dB typical)
Vibrator alarm: Pulses warning in gas alarm conditions, or for any status alarms
Other: Low battery, over range, multiple gas and missing sensor
ALARM LEVELS: Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;
TWA ( time weighted average) and STEL ( short term exposure limit) for CO;
OL ( over limit alarm)
LCD: Continuous, alphanumeric gas readout and status display advises:
Gases monitored: CO, O2, combustibles ( 0-100% LEL or 0-5.0% v/ v methane)
Gas concentration: Simultaneous and continuous display of gas concentration( s) present
( in ppm, % LEL, or % v/ v)
STEL/ TWA ppm: Records STEL and TWA exposures and displays on demand
Peak ppm or % : Records and displays peak exposure to gas and displays on demand
Alarm setpoints: Displayed on activation
TESTS:
Full function self-test: Full function self-test of sensor integrity, circuitry, battery and
audible/ visual alarms on activation
Battery: Continuous
GENERAL SPECIFICATIONS: Rugged, composite material with integral concussion-proof boot
Operating temperature: -4 to 136 oF / -20 to 58 oC
Temperature code: T4
Humidity: 0% to 95% RH ( non-condensing)
EMI/ RFI: Complies with EMC Directive 89/ 336/ EEC
Ingress Protection: IP66/ 67 ( expected)
Battery run-time: Up to 12 hours ( typical)
Size: 4.2 x 2.4 x 1.1 in. / 10.7 x 6.0 x 2.7 cm
Weight: 5.6 oz. / 160 g
EVENT LOGGING: Records and transmits up to 10 gas alarm events
Event information: Gas type; peak exposure level ( ppm or % ) ; alarm duration in minutes and seconds;
time elapsed since the alarm occurred in days, hours and minutes; life remaining;
serial number; self-tests; cumulative alarm time
DATALOGGER: User-downloadable datalogger
Data recorder: All events and occurrences
Sampling rate: Factory set at 15-second intervals
Storage: 16 hours; when full, the wraparound feature replaces oldest data with most recent data

Contact : www.karyamitra.co.id
e-mail : karyamitrausaha@ yahoo.com
Telp 0251-7543316
Telp 021-70748483