3M-Matic⢠700a Adjustable Case Sealer (Barang 2nd)
Specifications,
Box
Style: Regular slotted container (RSC).
Bursting test: 125 to 275 lbs. per sq. inch single or double
wall, B or C flute.
Size:
Min Max
Width 6â[150mm] 21.5â[550mm]
Length 6â[150mm] No limit
Height 4.75â[120mm]* 24.5â[625mm]
With masts mounted in upper position.
Height 6.5â[165mm] 28.5â[725mm]
*3.5â [90mm] with taping heads adjusted to apply 2â [50mm] tape
leg lengths and mast stops relocated.
Special modifications may be available for carton sizes not listed
above. Contact your 3M sales representative for information.
Weight: Up to 85 lbs. [38.6kg]
Packing: Contents must support flaps.
Note: The 3M-Matic 700a Adjustable Case Sealer can
accommodate most boxes within the size range listed above.
However, if
Box Length in Direction of Seal
is less than .5
Box Height
boxes should be test run to assure proper machine performance.
Tape:
Scotch brand pressure sensitive box sealing tapes.
Width: 1.5 inches or 36mm minimum to 2 inches or 50mm
maximum. Roll diameter: up to 16 inches [406mm]
diameter on a 3 inch [76.2mm] diameter core.
Machine:
Power Electrical â 115 V, 60Hz, 3.8A, 440 watts, 8ft. [2.4m]
power cord with grounded plug included.
Contact your 3M sales representative for power requirements not
listed above.
Weight:
346 lbs. [157kg] uncrated
401 lbs. [182kg] crated
Operating rate: Up to 30 boxes per minute depending on
box length.
Box drive belt speed: 75 fpm [.38m/s]
Operating conditions: Use in dry, relatively clean environments at
40°F to 120°F [4.4°C to 48.9°C] with clean dry boxes.
Machine should not be washed down or subjected to conditions
causing moisture condensation on components.
Indotrade Priority