Welcome to Indotrade.co
Sign In | Sign Up
Registration Date: May. 30, 2006. Last Updated: Feb. 14, 2012
Business Nature : Manufacturing, Trade, Service of Industrial Supplies category

Company Brief

INDUSTRIAL CONTRACTOR AND SUPLAYER

WE ARE WILLING TO BE THE BEST PARTNER FOR INDUSTRIAL OIL AND GAS COMPANY IN INDONESIA

WE SIMPLY THE BUSSINNESS TO GET WIN WIN SOLUTION

BEST REGARDS,

RAHMAT HIDAYAT
081230777817
DIRECTOR OF AGRO INDUSTRI
___________________AGRO INDUSTRI SURABAYA
KAWASAN INDUSTRI GRESIK
JL. KIG SELATAN IV, KAV. 11
RANDUAGUNG, GRESIK, 61121
telp. 0313989496 , 03160234888 , 031 92150778 fax. 0313980197
email: industri2034@ gmail.com cc: agroindustrisurabaya@ gmail.com
www.agroindustrisurabaya.com
Work With Fast,

15 / 02/ 2012

Major Products / Services

Buyer

INSULATION PRODUCT
1. Hot & Cold Insulation
2. Roofing
3. Fire proofing
4. Sound proofing
5. Duckting AC

Adapun material yang kami supply :

1. Hot Insulation:
- Rockwool ( Roll, Lembar, Pipa )
- Glasswool ( Roll, Lembar )
- Ceramic Fiber ( Roll, Lembar )
- Calsium Silicate ( Lembar, Pipa )
- Asbestos
2. Cold Insulation :
- Styrofoam ( Lembar, Pipa )
- Polyurethane ( Lembar, Pipa )
- Rubber Insulation ( Lembar, Pipa Merk : Armaflek & K-flek )
- Glasswool ( Roll, Lembar )
3. Building Ins. :
- Roofmesh
- Glasswool ( Roll, Lembar )
- Aluminium Foil S/ S dan D/ S
- Aluminium Tape
- Spindle Pin
4. AC Insulation :
- Flexible Duct Isolasi / Non Isolasi
- Glasswool ( Roll, Lembar )
- Metalizing Tape
- Seng BJLS
- Glasscloth
- Spindle pin

Seller

SOLENOID VALVE BRAND ASCO
SOLENOID VALVES
The solenoid is an electromagnetic part of a valve, comprised of a coil, coretube, core and enclosure. ASCO Redhat brand offers the worlds largest selection of 2-, 3- and 4-way solenoid valves, designed to handle the most demanding fluid control applications.

2-WAY
One inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are “ Normally Closed” and “ Normally Open” .

3-WAY
These valves have three pipe connections and two orifices. When one orifice is open, the other is closed and vice versa. They' re commonly used to alternately apply pressure to and exhaust pressure from a valve actuator or a single acting cylinder. These valves can be normally closed, normally open or universal.

4-WAY
These valves have four or five pipe connections, commonly called ports. One pressure inlet, two cylinder ports providing pressure to double acting cylinder or actuator, and one or two outlets to exhaust pressure from the cylinders.
OILFLOW METER FR901 TUTHILL
PRODUCT DATA SHEET
Series 900 Meter
z Description of Included Models
z Available Options
z Safety Listings
z Accessories
z Performance
z Flow Control
z Fluid Compatibility
z Dimensions
z Repair
z Maintenance
z Frequently Asked Questions
z Reference Literature

Model 901 Pump Shown
Model Number Description Shipping
Weight
901 Basic Meter with 1" Inlet & Outlet 8 LBS.
3.6 KGS.
9011.5 Basic Meter with 1 1/ 2" Inlet & Outlet 8 LBS.
3.6 KGS.
901LMK4200 Basic 901 Meter with Pipe Fittings to Add this Meter to Model FR4210 8 LBS.
3.6 KGS.
901LMK300 Basic 901 Meter with Pipe Fittings to Add this Meter to Models 300 and 310 8 LBS.
3.6 KGS.

Approval Organization Mark Organization Description File
Number
Guide
Number
Underwriters Laboratories Inc., a nationally recognized
Independent organization for testing of products to ensure public
safety. Also recognized and accepted in Canada.
MH8290 PLRZ

Flow Control
Fluid Compatibility
Option Description
Shipping
Weight
( lbs.)
Shipping
Weight
( kgs.)
L Liter Registration in Place of Standard Gallon Measure - -
N Nickel Plating on Fluid Handling Components - -
T Teflon Coating on Fluid Handling Components - -
Recommended Flow Range 6 to 40 GPM ( 23 to 152 LPM)
Accuracy ± 2%
Maximum Pressure 50 PSIG
Meter Digit Indication Up to 1, 000 Gallons in 1/ 10th Increments ( Resettable)
Totalizer Digit Indication Up to 1, 000, 000 Gallons ( Non-Resettable)

A. This curve represents the expected pressure loss
through the Model 900 Meter as a function of flow. Any
pump used in the system must supply not only the
pressure required to move the fluid, but also that
required to overcome the pressure drop through the
meter.

The 900 Series meters are compatible with the following fluids:
Diesel Fuel, Gasoline, Kerosene, Mineral Spirits, Heptane and Hexane.
The 900 Series meters are NOT compatible with the following fluids:
Bleach, Hydrochloric Acid, Ink, Motor Oil and Salt Water.
If in doubt about the compatibility of a specific fluid, contact the supplier of the fluid to check for any adverse
reactions to the following wetted materials.

Repair
To insure the ultimate performance, pumps must be set up according to the " INSTALLATION" section of the Owner' s
Manual packed with the pump and available below in the Reference Literature section.
Meters requiring repair should be taken to an authorized repair shop or returned to the factory for service. Meters MUST
be thoroughly triple-rinsed before being taken in, or shipped, for repair.
[ back to data sheet index]
Ryton 300S Stainless Steel
400S
Stainless
Steel
All
Aluminum 901
Aluminum, Nickel Plated 901N
Aluminum, Teflon
Coated 901T
Buna N 901

Maintenance
Meters are designed to operate maintenance free. Certain liquids can dry out while in the meter housing, preventing the
meter from operating properly when next used. If this happens, the meter should be thoroughly cleaned by running a
flushing fluid through the meter in the normal direction of fluid flow, without disassembly. If fluid cannot be " forced"
through the meter with 50 PSIG fluid pressure and thus freed, the meter must be disassembled and thoroughly cleaned.
Refer to the instructions in the ASSEMBLY/ DISASSEMBLY section of the Parts and Technical Service Guide that was
packed with your meter or is available below in the Reference Literature section for the procedure.

Frequently Asked Questions
The questions below are linked to the answers for that particular question. Point and click on the question of interest and
you will be move to the answer to that question. Buttons are provided to allow you to move back to this question list or to
the original INDEX.
1. When I went to use my meter for the first time this year it was stuck. What can I do?
2. Can I use this material to sell kerosene from my tank?
3. What do you mean by a " positive displacement meter?
4. How can I be sure my meter is operating properly?
5. What limits the flow capacity of this meter?

1.When I went to use my meter for the first time this year it was stuck. What can I do?
Although your meter is designed to require little or no maintenance, the residual material left when a fluid dries in the
meter can jam the close tolerance disc within the chamber. See the procedure recommended for cleaning the meter
above and in the Guide referenced below and packed with the meter. Generally a thorough cleaning will restore the
meter to full operation.

2. Can I use this meter to sell kerosene from my tank?
This meter mechanism is capable of high accuracy, typically 0.5% , if operated under steady flow rate and calibrated at
that rate. This capability however does not meet the requirements of the Weights and Measures Departments in most
states and they therefore will not approve this meter for use for the resale of liquids like kerosene.
See the Troubleshooting Guide in your Owner' s Manual packed with your unit or the copy available " on-line" in the
Reference Documents section of this More Info page for things to check.

3. What do you mean by a " positive displacement meter?
A positive displacement meter allows a VERY specific volume of fluid to move through the meter with every rotation of
the mechanism. Conversely if the mechanism of a positive displacement meter is held, there should be no flow through
the meter. That VERY specific volume is determined by the designed size of the meter chamber and allows the rotating
meter shaft to be tied to a counter which indicates the count of rotations as the volume of fluid passing through the
meter. By varying the gear ratio tying the chamber to the counter, the same chamber can be used for two different units
of measure, like gallons and liters.

4. How can I be sure my meter is operating properly?
After zeroing the meter, fill a container of known volume and compare the indicated volume to the measured volume. As
simple as this method seems it is used universally as the absolute calibration means by all requiring accurate meter
indication. A container used for this type calibration is described as a " proving can" and the use of a proving can 5X the
major unit of calibration is recommended. In the case of the 800 meter, where gallon is the most common unit of
measure, a five gallon proving can is recommended and generally can be obtained from the dealer where your meter
was purchased.

5. What limits the flow capacity of this meter?
The forced flow of fluid through the meter results in a pressure differential measured across the meter, and the higher
the flow through the meter, the higher that pressure drop across the meter. While the increase in pressure drop is close
to linear with the increase of flow over a considerable range, that linearity is lost at the upper flow levels because of the
physical size of the chamber and the ports into and out of the chamber. The upper limit where that linearity is lost is
normally taken as the upper flow limit of allowed operation. In the case of the 800C that flow level is 20 GPM.
STEEL GRATING
KAMI MEMBUAT STEEL GRATING SESUAI DENGAN UKURAN YANG ANDA BUTUHKAN DENGAN PENGALAMAN MELAYANI BERBAGAI KEBUTUHAN PABRIK.

Model Steel Grating:
- Serated Kombinasi Ulir
- Full Serated tanpa Ulir
- Rata kombinasi atau full plat strip

Finishing: Galvanis
Ukuran Standart : 1" x 90cm x 6 meter ( ready Stok)
Want to contact this company?
Add to Basket
or
Your inquiry will be recorded in "Member Trade Mail".