Specification

JYS -2000A digital display building materials compression testing machine JYS-2000A digital display building materials compression testing machine is mainly used to brick, cement and concrete compression test.
This machine is mainly consisted of load frame, oil source, control cabinet, digital meter. It adopts hydraulic load, oil pressure transducer to measure load, digital display, with peak value holding, loading speed function. The operation and display panel is convenient for the user to operate and observe.
The load frame is four columns tower structure, mainly consisted of base, piston, crosshead, adjusting screw rod and upper & lower platen. Screw nut and adjusting screw rod are mounted on upper crosshead. Downside of adjusting screw rod, there has sphere and upper platen. On the top of screw rod, there has a handwheel, user can adjust platen position through turning the hanwheel. Reticle on the lower platen is convenient to the operator to place specimen, the specimen should be center to the position frame line. Oil source control cabinet and digital meter is connected together with load frame.

Main specification

No.

Item

Specification

1

Max. capacity ( KN)

2000

2

Measuring range
4% -100% of FS
3

Relative error of reading
1%
4

Max. distance between two platen ( mm)
330
5

Compression platen size ( mm)

220* 220

6

Max. piston stroke ( mm)
0-20
7

Max. piston speed ( mm/ min)

Approx. 30
8

Column clearance ( mm)
300* 200
9

Oil pump motor power ( KW)
1.5
10

Whole dimensions ( mm)
855* 380* 1435
11

Whole weight ( KG)
Approx. 1000

Distributor, agent, penjualan, service, perbaikan upgrade system. alat uji, alat laboratorium, alat maintenance, alat inspeksi lapangan, alat quality inspection, alat quality control, alat riset, alat monitoring system, alat preventive maintenance. Jakarta - Indonesia.
www.alatuji.com
contact: 08156141954 - 0811893101.